Google Top Quality Store — Verified Exceptional Shopping Experience

Swivel Hinge Clear PVC Replacement Strips | 400mm Wide, Pre-Punched for 100% Overlap | 3mm or 4mm, up to 10m


Price:
Sale price£16.90
Inc. Vat

Express UK Delivery (2 Working Days)

Strip Size: 400mm x 3mm

In stock, ready to ship

Trusted by Industry Professionals

Description

On a 100% overlap curtain every strip covers half of each neighbour, so the doorway is two layers thick from edge to edge. Lose one strip and that double seal has a gap in it. These clear PVC strips are 400mm wide, cut to the length you choose and punched along the top edge to bolt straight into the hinges on a heavy duty swivel hinge rail set for 100% overlap. Unbolt the worn strip, bolt the new one in, and the curtain is back to full strength without taking the rail down. Choose 3mm or 4mm thick, from 1 metre up to 10 metres long. The price shown is per strip and includes VAT.

Swivel hinge 400mm 100% overlap strip size guide: hinges about 200mm apart, 3mm or 4mm, 1m to 10m

Is my rail set for 100% overlap?

Swivel hinge rails are set up for one strip width and one overlap, so the holes in a new strip have to match. For 400mm strips, measure from the centre of one swivel hinge to the centre of the next. About 200mm means 100% overlap, and these are the right strips. About 280mm means 60% overlap: choose our 400mm 60% overlap strips instead, which also suit our heavy duty loading bay curtain. If your strips are 300mm wide, see our 300mm swivel hinge strips. Not sure? Send a photo of your rail to sales@industrialsuppliesco.co.uk or call 01744 520 110 and we will check before you order.

Strip Duty Recommended up to Lengths
400mm x 3mm Medium 10m high 1000mm to 10000mm, 100mm steps
400mm x 4mm Heavy 10m high 1000mm to 10000mm, 100mm steps

3mm or 4mm?

400mm x 3mm, medium duty. Busy doorways with pedestrians, pallet trucks and lighter vehicle traffic.

400mm x 4mm, heavy duty. Thicker, heavier strip for forklift and HGV loading bays and large openings. Match the strips already on your rail if you are only replacing a few.

Choosing the length

Measure an old strip end to end. If it is damaged or stretched, measure from the bolt holes in the hinge to just above the floor. Lengths go up in 100mm steps. For an exact length, choose the next size up, then trim the bottom of the strip with a sharp knife against a straight edge. For a length outside this range, call us for a quote.

Specifications

Material Standard clear flexible PVC with anti-UV filters
Width and thickness 400mm x 3mm or 400mm x 4mm
Punching Pre-punched along the top edge for swivel hinge rails set for 100% overlap
Lengths 1000mm to 10000mm, in 100mm steps
Fixings Not included. Re-use the nuts and bolts from the old strip
Temperature range 0°C to +40°C
Compliance DOP free, REACH compliant
Sold Per strip. Set the quantity to the number of strips you need
Minimum order 10 strips
Fire rating Not published for this line

Fitting

Undo the nuts on the hinge holding the worn strip and lift it away. Line up the punched holes in the new strip with the hinge plates, push the bolts through, and tighten the nuts and washers. Check it overlaps the strips either side as before. Strips are delivered rolled, so a slight curl at the bottom is normal and drops out in time, more slowly in the cold. Unrolling them flat overnight before fitting helps. On a high rail, work from a scissor lift or other safe platform, never from the forks of a truck. Strip curtains do not replace safe traffic routes: keep vehicle speeds low through the curtain and keep pedestrians separate from forklift doorways where you can.

Frequently asked questions

Will these fit my rail?

They fit swivel hinge rails, the round tube rail with a hinge clamp for every strip, set for 400mm strips at 100% overlap, with hinges about 200mm apart. If your hinges are further apart, call 01744 520 110 with a photo and we will check.

Do you have black or red strips for this rail?

Yes. Our 400mm black or red swivel hinge strips come punched for 100% overlap rails like this one, and bolt into the same hinges. Use red at the edges of a clear curtain to mark the doorway.

Are bolts included?

No. The strip comes punched and ready to fit, and you re-use the nuts and bolts from the strip you are replacing.

How many strips do I need?

Count the hinges on your rail: there is one strip per hinge. To replace only the damaged strips, count those and order at least 10.

Can I use them outside?

The PVC has anti-UV filters, but every strip lasts longer and stays clearer when it is fitted inside the opening, sheltered from the weather.

Can I use them in a freezer?

No. Standard clear PVC is recommended for 0°C to +40°C and stiffens below freezing. For freezer doors, call us about polar grade strips.

Why is there a minimum order?

Strips are cut and punched to order, so the minimum order is 10 strips. If you need fewer, call 01744 520 110.

Ordering and delivery

Choose the strip size and length, set the quantity to the number of strips, then add to basket and check out online with Express UK Delivery to your site. To cut your own strips, we also sell clear PVC in 50m rolls. For several doors or large quantities, call 01744 520 110 or email sales@industrialsuppliesco.co.uk.

Our products have been used by

Logos are for illustrative purposes only and do not imply official endorsement

About Us

Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Klarna Maestro Mastercard Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Swivel Hinge Clear PVC Replacement Strips | 400mm Wide, Pre-Punched for 100% Overlap | 3mm or 4mm, up to 10m

400mm x 3mm / 1000mm

£16.90 Inc. Vat

You may also like

Recently viewed