Solid Black Rubber HGV Wheel Chock with Eye-Bolt - 230 x 160 x 205 mm, 44 Tonne Max Vehicle Weight

A tall wedge with nothing hollow inside. This chock has no core, so the rubber is solid from the ramp to the base. It stands about 205mm high, slides under the tyre on a thin toe and climbs the tread on a stepped ramp, with a 44-tonne maximum vehicle weight. A steel eye-bolt at the back takes a rope if you want one. Choose it for chocks that are in use every day. The price is for one chock.

Why this chock works

Solid rubber throughout. With no hollow core, more rubber sits under the load, which is why it costs a little more than the cored version.

A tall ramp for a big tyre. At about 205mm high, the ramp reaches well up the tread, and if the wheel starts to roll it bears down on the chock and presses it into the ground.

Stepped ribs across the ramp. A row of square ribs gives the tyre edges to bear against instead of a smooth face.

Eye-bolt at the back. Fit a rope so you can pull the chock clear without reaching in beside the wheel. The rope is not included.

No test standard or slope rating is published for this line. If your specification needs a tested chock, call us before you order.

Where it is used

Use it at busy loading bays, in haulage and freight yards, on trailers parked up for loading, and in workshops when a vehicle is stood for repair.

Specifications

Sizes are approximate, as moulded rubber varies slightly.

How to use it safely

1. Apply the parking brake, stop the engine and take the keys out.
2. Push the toe under the tyre until the ramp is hard against the tread. The flat back faces away from the wheel.
3. On a slope, chock the downhill side first. Use a second chock on the other side of the tyre.
4. Before removing the chocks, make sure nearby vehicle movements have stopped and everyone is clear.
5. Take the chocks away before the vehicle moves, and never drive over one.

HSE guidance says chocks should be brightly coloured so they can be seen, and this one is black. On a busy site, choose a yellow chock or make it easier to spot in line with your risk assessment. A chock backs up the parking brake and does not replace it.

Which chock do you need?

Care

Check each chock before use and replace it if the rubber is split or the eye-bolt is loose. Wipe off oil and grease, as these attack SBR rubber over time.

Frequently asked questions

Ordering and delivery

Add the number of chocks you need and check out online, with Express UK Delivery to your site. For a whole fleet or several depots, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.