-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
This black square side outlet tee ties a 25mm box upright to three rails at once, for light racks, stalls, display stands and frames with rails in more than one direction. The upright passes straight through a square hole in the middle, and three square sockets take rails from the left, the right and the front, all at 90°. Four grub screws lock the upright and the three rails, with no welding or drilling. It is malleable cast iron with a black electrophoretic finish, for indoor use only, made for 25 x 25mm square box section. The price shown is for one fitting, with a minimum order of 5.

Why use a square side outlet tee
Three rails, one fitting. Where a rack or stall has rails running along and across it, this replaces two or three separate clamps on the same upright.
The upright carries on. The upright passes through, so it can continue up to the next level or down to a footplate without being cut.
Square and rigid. Square box cannot turn in its socket the way round tube can, and the sockets are cast at right angles, so frames come out square.
No hot work. Everything goes together with a hex key, and frames can be altered later.
Where it is used
Shop fitting and display stands, office and reception partitions, café and bar frames, garment rails, shelving, tables and furniture, and any indoor frame built from 25 x 25mm box section.
Specifications
| What you get | One side outlet tee with four grub screws fitted, minimum order 5 |
|---|---|
| Fitting type | Three way side outlet tee, upright passes through |
| Suits | 25 x 25mm square box section, upright and all three rails |
| A: upright centre to end of front socket | 42mm |
| B: across the two side sockets | 87mm |
| C: overall depth | 61mm |
| Material | Malleable cast iron |
| Finish | Black electrophoretic coat |
| Grub screws | Four, hex socket (size not published for this line) |
| Weight | About 0.40 to 0.43 kg |
Which 25mm square fitting goes where
| Joint | Fitting |
|---|---|
| Upright with rails left, right and front | This side outlet tee |
| Upright with a rail passing straight through | 25mm square four way cross |
| Upright with rails in all four directions | 25mm square centre cross |
| Rails at a corner, upright carrying on | 25mm square three way mid corner |
| Rail on top of an upright | 25mm square short tee |
| Upright to the floor | 25mm square footplate base |
How many do you need?
One wherever an upright has rails going three ways at the same height. On a rack with a back rail and shelf rails running forward, that is each middle upright along the back, at every shelf level.
| Frame | Side outlet tees |
|---|---|
| 2-bay rack, 3 back uprights, 3 levels | 3 |
| 3-bay rack, 4 back uprights, 3 levels | 6 |
| Display stand, 3 back uprights, 2 levels | 2 |
Choosing the right size
Square key clamps are sized by the outside of the box section. This one suits 25 x 25mm box; measure across the flats before ordering. For heavier frames in 40 x 40mm box, use the 40mm square side outlet tee. The sockets are closed, so rails cannot be joined inside the fitting.
Fitting and care
Slide the fitting onto the upright before fitting anything above it. Set the height, push each rail fully into its socket, check the frame is square and level, then tighten all four grub screws firmly with a hex key. Check them after the first week on loaded racks. touch up scratches with black paint.
Frequently asked questions
Is the price for one fitting?
Yes. The price is for one side outlet tee with all four grub screws fitted. The minimum order is 5.
Will it fit round tube?
No. It is made for 25 x 25mm square box section only.
Can the upright stop inside the fitting?
Yes, if it reaches past the upright's grub screw. It is designed to pass through.
Can I use it outdoors?
No. The black electrophoretic finish is for indoor use only. For outdoor frames, use the galvanised version.
Ordering and delivery
Order 5 or more online, with Express UK Delivery and same-day dispatch on orders before 2pm, Monday to Friday. For larger quantities, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Minimum order 5 pcs




