-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
The black square footplate base fixes a 25 x 25mm box-section upright to a floor or wall on a square plate with four fixing holes. The box section pushes into the square socket and one grub screw on the front locks it. Screw or bolt the plate down through its four 7mm holes and the upright stands square, ready for rails, shelves or panels. It is the usual start and end point for light black square-tube frames: display stands, shop fittings, room dividers and clothes rails. It is malleable cast iron with a black electrophoretic coat and is for indoor use only. The price shown is for one base, with a minimum order of 7.

Why use a black square footplate base
Square on square. The box section sits in a square socket, so the upright cannot twist and frames stay true.
Four fixings, close to the corners. The holes sit on 52mm centres, spreading the fixings across the 74mm plate.
Floor or wall. The same base starts an upright on a floor or ends a rail against a wall.
No welding. Fix the plate, push in the box section and tighten one screw with a hex key. The upright can be lifted out later.
A neat dark finish. The black coat suits black box section in shops, bars, cafés, offices and homes.
Where it is used
Shop display stands and clothes rails, light indoor shelving and staging, room dividers, office and café frames, indoor queue rails and rail ends fixed to walls.
Specifications
| What you get | One black footplate base with its grub screw fitted, minimum order 7 |
|---|---|
| Fitting type | Square footplate base / wall flange |
| Suits | 25 x 25mm square box section |
| A: plate width | 74mm square |
| B: overall height | 48mm |
| C: fixing holes | Four, 7mm (fixings not included) |
| D: hole centres | 52mm square |
| Material | Malleable cast iron |
| Finish | Black electrophoretic coat |
| Use | Indoors only |
| Grub screw | One, hex socket |
| Weight | About 0.41 kg |
Know its limits
This base is for light square-tube frames. It is not a structural post base, and no load rating is published, so for barriers or frames that must carry a set load, ask a structural engineer to check the design and the fixings. It fits 25 x 25mm box only and will not grip round tube. The electrophoretic coat is for indoor use only and will rust outdoors.
Which 25mm square fitting goes where?
| Joint | Fitting |
|---|---|
| Upright to the floor or a wall | This footplate base |
| Top rail running through over a post | Black short tee |
| Two rail lengths joined over a post | Black long tee |
How many do you need?
One under each upright that stands on the floor, plus one at each rail end fixed to a wall. A simple four-legged display stand needs four.
Choosing the right size
Square key clamps are sized by the outside of the box section. This base suits 25 x 25mm box; measure across one face before ordering. For outdoor frames, use the galvanised 25 x 25mm footplate base, which is the same shape with a zinc coating.
Fitting and care
Mark the plate position, drill and fix it to a sound floor or wall with four screws, anchors or bolts up to 7mm, to suit the surface. Push the box section fully into the socket and tighten the grub screw firmly with a hex key. Check the screw and fixings after the first week and once a year. Touch up chips with black paint and wipe clean with a damp cloth.
Frequently asked questions
Is the price for one base?
Yes. The price is for one footplate base with its grub screw. Floor fixings are not included. The minimum order is 7.
Will it fit round tube?
No. The socket is square and made for 25 x 25mm box section only.
Can I fix it to a wall?
Yes. It works as a wall flange to end a box-section rail against a wall.
Can I use it outside?
No. The electrophoretic coat is for indoor use only. Use galvanised fittings outdoors.
Ordering and delivery
Order 7 or more online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For larger quantities, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Minimum order 7 pcs






