-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
The black square centre cross joins four rails to one upright in the middle of a 25 x 25mm box section frame, all at 90°. The upright passes straight through the centre of the fitting, and four square sockets around it take horizontal rails running front, back, left and right. Each box section is locked by a hex socket grub screw, so there is no welding, drilling or bolting. It is the fitting for the middle uprights of lighter frames, where rails run off in every direction. It is malleable cast iron with a black electrophoretic finish, for indoor use only. The price shown is for one fitting.

Why use a centre cross
Four rails, one fitting. In the middle of a frame, rails meet an upright from all four sides. One centre cross does the job of several tees, with every rail at the same height and square to its neighbours.
The upright carries on. The upright passes straight through, so a single length runs from the floor to the top of the frame, with shelves or levels fixed wherever you set the cross.
Square section, no twisting. Box section cannot spin in a square socket, so rails stay square and level and shelf boards sit flat.
No hot work. Frames go together with a hex key and can be taken apart, extended or moved later. The finish stays intact.
Where it is used
Shop fitting and display stands, office and reception partitions, café and bar frames, garment rails, shelving, tables and furniture, and any indoor frame built from 25 x 25mm box section.
Specifications
| What you get | One centre cross with grub screws fitted |
|---|---|
| Fitting type | Four way centre cross, upright through the middle |
| Suits | 25 x 25mm square box section, upright and all four rails |
| A: across the arms, front to back | 86mm |
| B: across the arms, side to side | 86mm |
| C: overall height | 61mm |
| Material | Malleable cast iron |
| Finish | Black electrophoretic coat |
| Grub screws | Hex socket |
| Weight | About 0.57 kg |
Know its limits
The upright passes through and cannot be joined inside this fitting; to extend an upright, use a joint elsewhere along it. The four rails end in their sockets and do not pass through. No load rating is published, so for shelving that carries heavy stock, ask an engineer to check the frame, or use the larger 40 x 40mm size.
Which 25 x 25mm fitting goes where
| Joint | 25 x 25mm square fitting |
|---|---|
| Four rails round a middle upright | This centre cross |
| Three rails round an edge upright | Three way side outlet tee |
| Rail passing through, with rails off both sides | Four way cross |
| Top rail joined over an upright | Long tee |
| Top rail at a corner upright | 90° elbow |
How many do you need?
One at each level of every middle upright that has rails on all four sides. A frame three bays long and two bays deep, with two levels of rails, has two middle uprights and needs four centre crosses; the edge and corner uprights use side outlet tees and corner fittings.
Choosing the right size
Square key clamps are sized by the outside of the box section. This cross suits 25 x 25mm box only: measure across one face. It will not grip round tube. For heavier frames, the same centre cross is made for 40 x 40mm box section.
Fitting and care
Slide the cross onto the upright and set its height. Cut the rails square and deburr them, push each fully into its socket, level the frame and tighten all grub screws firmly with a hex key. Check the screws after the first week and once a year, and touch up scratches with black paint.
Frequently asked questions
Is the price for one fitting?
Yes. The price is for one centre cross with its grub screws fitted.
Can the upright be joined inside it?
No. The upright passes straight through and cannot be joined in this fitting.
Will it fit round tube?
No. It is made for 25 x 25mm square box section only.
Can I use it outdoors?
No. The black electrophoretic finish is for indoor use only. For outdoor frames, use the galvanised version.
Ordering and delivery
Order online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a full frame or larger quantities, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.




