-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
A full-height ornate centrepiece for gates, railings and balconies. This panel is 1000mm tall and 290mm wide, built from 16 x 8mm flat bar on a straight centre bar. Big curled C-scrolls frame the top and bottom; between them a shouldered outer frame swells to its widest at the middle, and inside sit two heart-shaped scroll groups ending in forged drops, with a ring of four small curls collared at the centre. Short 90mm plain ends let you weld it straight between your rails. It is the kind of detail that makes a plain gate look made to order. It comes in raw steel, ready to weld and finish. The price shown is for one panel.
Why fabricators use it
Hours of scrollwork in one part. Every scroll, frame bar, drop and collar is already formed and joined, so there is nothing to bend or tack. Weld the ends in and the feature is done.
Heavier section, bolder look. 16 x 8mm flat bar is chunkier than the usual 12mm scrolls, so the panel holds its own in a driveway gate or a long railing and reads clearly from the street.
Fits a standard gate height. At 1000mm with short plain ends, it fills the infill of a typical metre-high gate or railing. For taller gates, add plain bar above and below.
Takes any finish. Raw mild steel can be painted, powder coated or hot-dip galvanised to match the rest of the job.
Where it is used
Centrepieces in single and double driveway gates, feature bays in front garden railings, Juliet balcony fronts, staircase and landing balustrades, side gates, decorative screens and restoration work on period houses.
Specifications
| What you get | One ornate scroll panel |
|---|---|
| Overall length | 1000mm |
| Width | 290mm |
| Section lengths | 90mm plain, 820mm scroll body, 90mm plain |
| Bar | 16 x 8mm flat bar |
| Decoration | C scrolls top and bottom, shouldered frame, two heart scroll groups with drops, four-curl centre |
| Material | Mild steel |
| Finish | Raw steel, unpainted |
| Weight | About 6 kg |
How many do you need?
This is a feature panel, normally used one at a time:
| Job | Typical number |
|---|---|
| Single garden or side gate | 1, centred |
| Pair of driveway gates | 2, one in each leaf |
| Front railing | 1 per bay, or 1 per metre |
| Juliet balcony | 1, centred |
Stairs, landings and balconies in homes: no gap may let a 100mm sphere pass. Set the plain bars either side close to the scrolls and check every opening, including those inside the scrolls, with a 100mm gauge.
Choosing the right panel
Other panels in heavy 16 x 8mm flat bar:
- 1000 x 220mm panel, narrower
- 980 x 250mm panel
- 900 x 390mm panel, wider and lower
- 1100 x 460mm panel for taller, wider gates
For a lighter look in 12mm bar, see the 310 x 1000mm floral scroll baluster panel, or browse every design in our decorative panels range.
Fitting and care
Centre the panel in the gate or railing bay. Tack the plain ends to the top and bottom rails, check it is plumb and square to the frame, then weld out and grind flush. In a gate, tack the outer scrolls to the neighbouring bars for extra stiffness. Raw steel will rust if left bare, so finish it promptly. Outdoors, have it hot-dip galvanised, or degrease, prime with a zinc-rich or etch primer and top coat with metal paint, working paint into the joints and collars. Check paintwork each spring and touch up chips.
Frequently asked questions
Is the price for one panel?
Yes. The price is for one ornate scroll panel. Stock of this panel is limited, so for several matching panels call us first and we will confirm availability.
Can I make it shorter?
Only a little. The plain ends are 90mm, so trimming them suits a clear height down to about 830mm. Below that the scrolls would need cutting, which spoils the design.
Is it painted?
No. It is supplied as raw mild steel so you can weld it first and finish it with the rest of the job. Stored outside unpainted it will show surface rust.
Is it the same both sides?
Yes. It is flat bar throughout, so it looks the same from both faces and can go either way up.
How heavy is it?
About 6 kg, so it adds only a little to a gate leaf; standard gate hinges carry it easily.
Ordering and delivery
Order online with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For matching sets or a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
