Fleur Arch Baluster Panel 250 x 980mm, 16 x 10mm Flat Bar, Fleur-de-Lis and Twisted Bars, for Balustrades

A tall arched baluster panel with fleur-de-lis detail for balustrades and railings. This panel is 980mm high and 250mm wide, made from 16 x 10mm flat bar. Each end is a round arch about 215mm tall holding a cast fleur-de-lis leaf ornament with curled C scrolls, finished with a small steel ball on the outside of the arch for welding to your rails. Between the arches, two long side bars with twisted sections frame a straight centre bar, with a ring in the middle and curled leaf scrolls flaring out to both sides, all held with forged collars. It is 16mm deep and weighs about 6.9kg. Set one in the middle of a landing or staircase run, or a few along a front railing. It comes in raw steel, ready to weld and finish. The price shown is for one panel.

Why fabricators use it

Heavy flat bar. The 16 x 10mm section gives a solid, substantial panel that suits heavier railings and balustrades.

Ball tips to weld to. The ball at each end sits neatly on the rail, giving a clean, traditional joint.

Classic detail. Fleur-de-lis ornaments, twisted bars and leaf scrolls give a period look that stands out among plain balusters.

Symmetrical. The panel is the same top to bottom, so either way up is right.

Mild steel takes any finish. Paint it, powder coat it or have it hot-dip galvanised so it matches the rest of the job.

Where it is used

Staircase and landing balustrades, front garden railings, pedestrian gates, balcony fronts, window guards and garden screens.

Specifications

How many do you need?

Choosing the right panel

This panel fits a rail gap of about 980mm. For a lighter or different design, compare:

• 220 x 1000mm twist scroll baluster panel
• 300 x 1000mm leaf circle baluster panel
• 200 x 1000mm heavy S scroll flower baluster
• 250 x 800mm rosette scroll panel

See every design in our decorative panels range.

Stairs, landings and balconies in homes: the gaps in the guarding must not let a 100mm sphere pass. Set your plain bars close to the panel and check the spaces inside the arches for your job.

Fitting and care

Set the rails about 980mm apart at the panel, or pack to suit. Stand the panel upright, check it is plumb, tack the ball tips to the bottom and top rails, then weld out and dress the welds. Raw steel will rust if left bare, so finish it the same day or keep it dry. Outdoors, have it hot-dip galvanised, or degrease, prime with a zinc-rich or etch primer and top coat with metal paint.

Frequently asked questions

Ordering and delivery

Order online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For several pieces, mixed parts or a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.