Vase Lattice Panel 460 x 1100mm, 16 x 8mm Flat Bar, Gate Centrepiece and Wall Feature

A tall, contemporary vase-shaped panel for driveway gates and garden walls. This panel is 1100mm tall and 460mm wide, made from heavy 16 x 8mm flat bar. Woven square lattice forms a pointed diamond at the top and bottom. Between them, double curved side bars trace a vase outline, each with a small lattice diamond at mid height, and a centre bar carries a cast four-petal rosette above a pair of curled scrolls. It mixes geometric lattice with soft curves, so it suits modern houses as well as traditional ones. It comes in raw steel, ready to weld and finish. The price shown is for one panel.

Why it stands out

Tall enough for a full gate. At 1100mm it fills most of the height of a standard driveway gate leaf, so one panel per leaf gives a complete, balanced look.

Geometric and traditional at once. The woven lattice reads as modern; the scrolls and rosette keep it at home on period properties.

Heavy and rigid. About 9.55 kg in 16 x 8mm bar, so it stiffens a gate leaf rather than just decorating it.

Takes any finish. Raw mild steel can be painted, powder coated or hot-dip galvanised.

Where it is used

Centrepieces in pairs of driveway gates, single pedestrian gates, feature bays in railings, courtyard and garden wall art, room dividers, and fire surrounds.

Specifications

How many do you need?

Stairs, landings and balconies in homes: some openings inside the vase are wider than 100mm, so as guarding it needs extra bars or backing. Check every opening with a 100mm gauge.

Choosing the right panel

• 405 x 800mm lattice scroll panel, shorter with a woven diamond centre
• 400 x 900mm tracery panel, geometric
• 800 x 800mm square scroll panel
• 290 x 1000mm ornate scroll panel, narrower

See every design in our decorative panels range.

Fitting and care

In a gate, build the frame and bars first, set the panel centred in the leaf, tack the lattice points and the widest part of the vase to the bars around it, check it is square and weld out. For wall art, weld three flat-bar lugs to the back and fix with masonry anchors, holding it slightly off the wall so water can drain. Get help lifting: it is nearly 10 kg. Raw steel will rust if left bare, so finish it promptly. Outdoors, have it hot-dip galvanised, or degrease, prime with a zinc-rich or etch primer and top coat with metal paint, working paint into the lattice joints.

Frequently asked questions

Ordering and delivery

Order online with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For matching pairs or a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.