-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
A 316 stainless 3-way corner tee that turns a top rail round a corner on top of a post, for 48.3mm tube with a 2.6mm wall. It has three push-in spigots: two horizontal at 90 degrees to each other for the rails, and one pointing down into the corner post. The body is the same 48.3mm as the tube, so the corner reads as one neat flush joint. Satin 316 suits outdoor, coastal and pool-side guard rails. The price shown is for one corner tee.

What you get
| Sold as | One 3-way corner tee |
|---|---|
| Tee | Three push-in spigots, 316 stainless, satin |
| Not included | The tube, adhesive or weld |
Why choose this corner tee
One part for the corner. Two rails and the post meet in a single fitting, so there is no mitre to cut and weld at the corner of a guard rail.
Flush with the tube. The body is 48.3mm, the same as the rail and post, so only fine joint lines show.
Made for 2.6mm wall tube. The 43mm spigots fit the bore of 48.3 x 2.6mm tube, the heavier wall used on public and commercial guard rails. For 2.0mm wall tube use the 316 corner tee for 48.3 x 2.0mm tube.
Specifications
| Material | 316 stainless steel, satin finish |
|---|---|
| Fits | 48.3mm tube with a 2.6mm wall |
| Legs | Three: two at 90 degrees, one down |
| Size | 90mm from the outside of the body to each spigot end, 60mm body |
| Spigots | 30mm long, 43mm across, 40mm bore |
| Weight | About 0.38 kg |
Is this the right fitting?
| Your job | Choose |
|---|---|
| Rail turning a corner on a post, 48.3 x 2.6mm | This 316 corner tee |
| Same, with 48.3 x 2.0mm tube | 316 corner tee 48.3 x 2.0mm |
| Rail running straight over a post, 48.3 x 2.6mm | 316 flush tee 48.3 x 2.6mm |
| Rail turning a corner with no post, 48.3 x 2.6mm | 316 radiused elbow 48.3 x 2.6mm |
Fitting
Cut the tube ends square and deburr the bore. Push the down spigot into the top of the corner post, then push the two rails onto the horizontal spigots until each tube meets the body. Fix with a structural adhesive suitable for stainless steel, or tack weld round each joint and dress the weld back along the grain.
Safety. Post spacing, fixings and rail height for a guarding balustrade must be set by whoever designs and signs off the job, to Approved Document K and BS 6180 where they apply.
Care
Outdoors, rinse with fresh water and wipe along the grain every few weeks, more often near the sea or a pool, so salt and chlorine do not leave brown tea staining. Use warm soapy water; avoid chlorine bleach, wire wool and scouring pads.
Frequently asked questions
Is the price for one corner tee?
Yes, one 3-way corner tee.
Will it fit 48.3 x 2.0mm tube?
No. The spigots are sized for the bore of 2.6mm wall tube. Use the 48.3 x 2.0mm corner tee instead.
Can the down leg point up instead?
The tee can be fitted either way up, so it also works with the post continuing above the rails, though it is normally used with the post below.
Does it need welding?
No. It can be bonded with a structural adhesive, though welding and dressing gives the cleanest joint on public rails.
Ordering and delivery
Order online in any quantity, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a full guard rail with posts, tube and fittings, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm the parts and delivery before you order.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.



