-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
A 316 stainless flush tee that joins three lengths of 48.3 x 2.6mm tube in a T. Use it where a post meets a continuous top rail, where a mid rail meets a post, or to branch a handrail. Each leg has a 20mm spigot that pushes into the tube, and the body is the same 48.3mm as the tube, so the joint is smooth to the hand with a fine line where each tube meets it. Satin 316 suits outdoor, coastal and pool-side work. The price shown is for one tee.

What you get
| Sold as | One tee |
|---|---|
| Tee | Flush T junction in 316 stainless, satin, with a 20mm push-in spigot on each of its three legs |
| Not included | The tube, weld filler or adhesive |
Why choose this tee
A continuous top rail. The rail runs straight through the tee and each post plugs in from below, so a post-and-rail balustrade has an unbroken handrail with no caps or saddles to catch a hand.
Quick and square. The spigots locate inside the tube and hold the joint at a true 90 degrees while you weld or bond it, with no notching or fish-mouthing of tube ends.
316 grade for outdoors. 316 stainless contains molybdenum, which gives it much better resistance to salt and chlorine than 304, so it is the right choice by the sea, around pools and on exposed entrances.
Specifications
| Material | 316 stainless steel, satin finish |
|---|---|
| Fits | 48.3mm tube with a 2.6mm wall (43.1mm bore) |
| End to end | 110mm across the run |
| Body | 70mm long, 48.3mm, flush with the tube |
| Run centre to end of branch | 50mm |
| Spigots | Three, 20mm long, 43.1mm across, 39.1mm bore |
| Weight | About 0.39 kg |
Is this the right tee?
| Your situation | Choose |
|---|---|
| 48.3 x 2.6mm tube, outdoors | This 316 tee |
| 48.3 x 2.0mm tube, outdoors | 316 tee for 48.3 x 2.0mm tube |
| 48.3 x 2.0mm tube, indoors | 304 tee for 48.3 x 2.0mm tube |
| 42.4 x 2.0mm tube, outdoors | 316 tee for 42.4mm tube |
Fitting
Check the tube first: this tee suits 48.3mm tube with a 2.6mm wall, which has a 43.1mm bore. Thinner 2.0mm wall tube has a larger 44.3mm bore, so the spigots would be loose in it. Cut the tubes square and deburr the inside, push each tube onto its spigot until it meets the shoulder, then weld, or bond with a structural adhesive suitable for stainless steel. Dress any weld back along the grain to match the satin finish.
Care
Outdoors, rinse the rail and fittings with fresh water and wipe along the grain every few weeks, more often near the sea or a pool, so salt and chlorine do not leave brown tea staining. Use warm soapy water; avoid chlorine bleach, wire wool and scouring pads.
Frequently asked questions
Is the price for one tee?
Yes, one tee.
Will it fit 48.3 x 2.0mm tube?
Not well. The 43.1mm spigots are made for the bore of 2.6mm wall tube; 2.0mm wall tube has a 44.3mm bore. Use the tee for 48.3 x 2.0mm tube.
Do I have to weld it?
No. Many installers bond flush fittings with a structural adhesive made for stainless steel. Welding gives the strongest joint.
How many do I need?
One at the top of each intermediate post on a continuous rail; use elbows at corners and the ends of the run.
Ordering and delivery
Order online in any quantity, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a full post-and-rail balustrade with tube, tees, elbows and end caps, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm the parts and delivery before you order.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.



