Scroll Frame Panel 325 x 950mm, 12mm Square Bar, Open Gate and Wall Feature

A self-contained scroll frame for gates and walls. This panel is an open shape 325mm wide and 950mm tall in 12mm square bar, wide at both ends and narrow in the middle like a dog-bone. Each end carries a pair of large spiral scrolls, the waist has four more bound by a collar, and a slim centre bar carries a bud and leaf ornament above and below. It has no plain bar ends, so it sits within a frame or on a wall as a finished feature, rather than running between rails like a baluster. It is supplied in raw steel, ready to weld and finish, and the price shown is for one panel.

Why fabricators use it

A finished centrepiece. One panel gives a gate leaf or a plain wall a clear focal point. Because the design is symmetrical top to bottom and side to side, it looks right whichever way up it goes.

Weld where the scrolls touch. The outer curls give natural contact points against the rails and stiles of a frame, so it fixes with a few short welds and no brackets.

Standard 12mm square section. It matches the plain 12mm bars used on most domestic gates, so it does not look out of scale beside them.

Takes any finish. Raw mild steel can be painted, powder coated or hot-dip galvanised after welding.

Where it is used

Garden, side and driveway gates, window grilles, screens, courtyard wall features and restoration work where a single decorative panel is wanted in place of a run of bars.

Specifications

Sizing it to your frame

The panel needs a clear opening of about 950mm high to touch both rails. If your opening is taller, add short lengths of bar above and below on the centre line; if it is smaller, choose a shorter design, because this panel cannot be cut down. Across the width, allow 325mm plus your chosen gap each side.

Stairs, landings and balconies in homes: no gap may let a 100mm sphere pass. The openings inside this panel are well over 100mm, so it is not suitable on its own for domestic guarding.

Choosing the right panel

Pick this one when you want a standalone frame with no bar ends. Designs with similar proportions:

• 500 x 1000mm framed scroll panel, in flat bar for wider gates
• 300 x 1000mm leaf scroll gate panel, on a bar with ends to weld
• 310 x 1000mm floral scroll panel, with a cast flower centre
• 290 x 1000mm ornate scroll panel, heavier flat bar

See every design in our decorative panels range.

Fitting and care

Clamp the panel in the frame and check it is square and centred before you tack it. Tack at the outer curls, recheck, then weld out and dress the welds. To fix it to a wall, use stand-off fixings through short welded lugs so the wall surface stays clear of the steel. Raw steel will rust if left bare, so finish it promptly. Outdoors, have it hot-dip galvanised, or degrease, prime with a zinc-rich or etch primer and top coat with metal paint, working the paint into every scroll and leaf. Indoors, a good metal primer and a paint or wax finish is enough.

Frequently asked questions

Ordering and delivery

Order online with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. The price shown is for one panel. For a matching set or a larger order, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.