-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
A forged feature baluster with a twisted basket centre, made to weld into a railing, gate or staircase. It is a 1000mm length of plain 12mm square mild steel bar with a 380mm decorative centre: a narrow frame of flat bar closed top and bottom by outward-curling C scrolls, a small scroll on each side, forged collars and a twisted birdcage basket in the middle. It measures 225mm across the side scrolls. The last 310mm at each end is plain bar, so there is plenty to cut to height and weld between your rails. It comes in raw steel, ready to weld and finish. The price shown is for one panel.

Why fabricators use it
One forged piece, nothing to assemble. The frame, scrolls and basket are already fixed to the bar with forged collars. You treat it like any other 12mm square baluster: mark it, cut it, tack it and weld it.
Long plain ends. With 310mm of straight bar above and below the decoration, you can cut the panel down to suit a low garden railing or keep it full length for a gate or staircase, and still weld onto a clean square face.
Matches standard 12mm square bar. The bar is plain, not twisted, so it lines up exactly with the plain 12mm square balusters in the rest of the run.
Mild steel takes any finish. Raw steel can be painted, powder coated or hot-dip galvanised, so the panel finishes exactly like the rest of the job.
Where it is used
Front garden railings on low walls, side and garden gates, driveway gates, internal and external staircase balustrades, landing and balcony guards, window guards, pub and shop frontages, and garden screens.
Specifications
| What you get | One decorative baluster panel |
|---|---|
| Overall length | 1000mm |
| Width | 225mm across the side scrolls |
| Bar | 12 x 12mm square, plain |
| Section lengths | 310mm plain, 380mm decorative centre, 310mm plain |
| Centre design | Flat bar scroll frame, six C scrolls, forged collars, twisted basket |
| Material | Mild steel |
| Finish | Raw steel, unpainted |
| Weight | About 2.18 kg |
How many do you need?
Most railings use one decorative panel for every three or four plain bars. At 110mm bar centres, a one metre run holds about nine bars. As a guide:
| Railing run | Bars at 110mm centres | Panels, every 4th bar | Panels, every 3rd bar |
|---|---|---|---|
| 1 metre | 9 | 2 | 3 |
| 2 metres | 18 | 5 | 6 |
| 3 metres | 27 | 7 | 9 |
| 5 metres | 45 | 11 | 15 |
Choosing the right panel
Pick the panel by the bar size of your railing first, then by the look you want. This one is plain 12mm square bar with the longest plain ends in the range. Compare these panels in the same bar size:
- 160 x 1000mm basket and scroll panel with twisted bar
- 250 x 1000mm leaf scroll panel with forged leaves
- 170 x 1000mm panel
- 165 x 1000mm panel in 12mm twisted bar
See every design in our decorative panels range.
Stairs, landings and balconies in homes: the gaps in the guarding must not let a 100mm sphere pass. Keep your bar centres at 110mm or less and check the gaps beside the scroll frame with a 100mm gauge before you weld up.
Fitting and care
Measure the clear height between your rails and cut an equal amount off each plain end so the basket stays in the middle of the railing. Square the cut ends, tack the panel to the bottom rail, check it is plumb in both directions, tack the top, then weld out. Grind the welds flush. Raw steel will rust if left bare, so finish it the same day or keep it dry. Outdoors, have it hot-dip galvanised, or degrease, prime with a zinc-rich or etch primer and top coat with metal paint. Inspect painted railings each spring and touch up any chips straight away.
Frequently asked questions
Is the price for one panel?
Yes. The price is for one decorative baluster panel. For a full railing or a larger quantity, call us for a price.
Can I cut it shorter?
Yes. Each plain end is 310mm, so the panel can be cut down to about 400mm overall. Take the same amount off each end to keep the decoration central.
Is it painted or galvanised?
No. It is supplied as raw mild steel so you can weld it first and finish it with the rest of the railing. It will show surface rust if it is stored outside unpainted.
Is it the same both ways up?
Yes. The design is symmetrical top to bottom, so it can go in either way up.
Can it be used without welding?
It is made to be welded. You can drill the rails and pass the plain ends through, then fix them with a plug weld, but it is not a bolt-on part.
Ordering and delivery
Order online with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a full railing, mixed parts or a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.







