Rosette Scroll Panel 250 x 800mm, Grooved 16 x 8mm Flat Bar, Cast Flower Centre, for Gates and Railings

A rosette scroll panel that gives a gate or railing a crafted centrepiece. This upright panel is 800mm tall and 250mm wide, made from grooved 16 x 8mm flat bar. In the middle, an upright oval about 250mm tall holds a cast flower rosette with a small steel ball on each side. Above and below it, mirror-image sections of curled C scrolls are bound with forged collars, with a wavy flame-shaped bar down the centre and a short cross bar inside each end. It is 16mm deep and weighs about 5.2kg. Weld it into the middle of a gate or set a few along a railing or balustrade. It comes in raw steel, ready to weld and finish. The price shown is for one panel.

Why fabricators use it

A strong focal point. The cast rosette and balls sit right in the centre of the panel, so one panel in a gate draws the eye straight away.

Grooved bar. The fluted flat bar catches the light along every scroll, giving depth even in a single coat of black.

Fits a two-bar space. At 250mm wide it replaces about two bars in a standard railing or gate.

Symmetrical. The panel is the same top to bottom, so either way up is right.

Mild steel takes any finish. Paint it, powder coat it or have it hot-dip galvanised so it matches the rest of the job.

Where it is used

Pedestrian and side gates, pairs of driveway gates, front garden railings, Juliet balconies, staircase and landing balustrades, window guards and garden screens.

Specifications

How many do you need?

Choosing the right panel

This panel suits a rail gap of about 800mm. For a taller or different design, compare:

• 220 x 1000mm twist scroll baluster panel
• 275 x 900mm lattice knot panel
• 345 x 790mm leaf scroll panel
• 160 x 450mm textured scroll panel for low railings

See every design in our decorative panels range.

Stairs, landings and balconies in homes: the gaps in the guarding must not let a 100mm sphere pass. Some spaces inside the scrolls are larger than 100mm, so for guarding, check your layout or back the panel with bars or mesh.

Fitting and care

Set your rails about 800mm apart at the panel. Stand it upright, check it is plumb, tack the end scrolls to the bottom and top rails, then weld out and dress the welds. Raw steel will rust if left bare, so finish it the same day or keep it dry. Outdoors, have it hot-dip galvanised, or degrease, prime with a zinc-rich or etch primer and top coat with metal paint.

Frequently asked questions

Ordering and delivery

Order online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For several pieces, mixed parts or a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.