Leaf Scroll Corner Panel 600 x 600mm, 20 x 8mm Flat Bar, Cast Leaves and Flower

A forged corner panel for gates, arches, canopies and frames. This L-shaped panel has two straight sides of 20 x 8mm flat bar, each 600mm long, meeting at a square corner and finishing in a curled scroll. Inside the angle, flowing C and S scrolls are bound with forged collars and dressed with cast leaves, with a single cast flower about 276mm in from the corner. It is 20mm deep and weighs about 3.6kg. Weld it into the top corner of a gate, arch or frame to soften the right angle, or fix it to a wall as a decorative bracket under a door canopy, shelf or sign. It comes in raw steel, ready to fit and finish. The price shown is for one panel.

Why fabricators use it

Made for a right angle. The two straight flat-bar sides sit tight along a post and a beam, so the panel drops straight into a square corner and welds along both edges.

Works as a bracket too. Fixed with one side to a wall and the other running out under a canopy or shelf, it reads as a traditional wrought-iron bracket.

Leaves and a flower. Cast leaves and a cast flower give real depth and look good in a single colour of paint.

Use them in pairs. Turn one over and it faces the other way, so two panels make a matching pair for both corners of a gate, arch or canopy.

Mild steel takes any finish. Paint it, powder coat it or have it hot-dip galvanised so it matches the rest of the job.

Where it is used

Door canopies and porches, garden arches and pergolas, gate and doorway frames, carports and verandas, shop and pub signs, hanging basket brackets, shelf brackets and garden screens.

Specifications

How many do you need?

Choosing the right panel

For a long flat run of scrollwork rather than a corner, compare:

• 900 x 360mm floral scroll panel, left hand
• 900 x 360mm floral scroll panel, right hand
• 810 x 315mm twin S scroll panel
• 420 x 530mm forged rose bouquet

See every design in our decorative panels range.

Fitting and care

Offer the panel into the corner so both straight sides sit tight to the post and beam. Tack it at the corner and near each scroll end, check it is square, then weld out and dress the welds. As a wall bracket, drill the vertical side and fix it to sound masonry with stainless anchors, with the horizontal side level. Raw steel will rust if left bare, so finish it the same day or keep it dry. Outdoors, have it hot-dip galvanised, or degrease, prime with a zinc-rich or etch primer and top coat with metal paint.

Frequently asked questions

Ordering and delivery

Order online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For several pieces, mixed parts or a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.