Lattice Knot Panel 275 x 900mm, 16 x 8mm Flat Bar, Heart Scrolls, for Railings and Balustrades

A tall lattice knot panel that adds a crafted feature to a bar railing. This panel is 900mm high and 275mm wide, made from 16 x 8mm flat bar. Two straight uprights run the full height, 160mm apart. Near the top and near the bottom they step out to 275mm and weave into a lattice knot of crossing bars, finished with small heart-shaped C scrolls on all four sides and bound with forged collars. The two knots sit about 520mm apart, with plain bar between them and at both ends for welding to your rails. It is 16mm deep and weighs about 4.5kg. Set one in the middle of a gate or in every bay of a railing or balustrade. It comes in raw steel, ready to weld and finish. The price shown is for one panel.

Why fabricators use it

A strong feature in a plain run. The woven knots and heart scrolls stand out against plain bars, so one panel per bay is enough to lift a whole railing.

Plain ends for easy fitting. The uprights finish in straight flat bar top and bottom, so you can trim to height and weld to your rails like a pair of balusters.

Flat bar reads crisply. The 16 x 8mm flat section gives clean, even lines that look sharp in one coat of colour.

Symmetrical. The panel is the same top to bottom, so either way up is right.

Mild steel takes any finish. Paint it, powder coat it or have it hot-dip galvanised so it matches the rest of the job.

Where it is used

Staircase and landing balustrades, front garden railings, pedestrian and driveway gates, balcony and Juliet balcony fronts, window guards and garden screens.

Specifications

How many do you need?

Choosing the right panel

This panel suits a rail gap of up to about 860mm. For a different style, compare:

• 360 x 900mm S scroll panel in 12mm round bar
• 340 x 900mm heavy S scroll panel in 16mm round bar
• 260 x 1000mm Italian scroll baluster
• 320 x 1000mm heavy leaf scroll panel

See every design in our decorative panels range.

Stairs, landings and balconies in homes: the gaps in the guarding must not let a 100mm sphere pass. The space between the uprights is 160mm, so set bars or infill so that no gap, inside or beside the panel, is over 100mm.

Fitting and care

Measure the clear height between your rails and trim the same amount off each end so the knots stay central. Tack the uprights to the bottom rail, check the panel is plumb and square, tack the top, then weld out and dress the welds. Raw steel will rust if left bare, so finish it the same day or keep it dry. Outdoors, have it hot-dip galvanised, or degrease, prime with a zinc-rich or etch primer and top coat with metal paint.

Frequently asked questions

Ordering and delivery

Order online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For several pieces, mixed parts or a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.