-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
Join two lengths of 48.3mm tube end to end with a joint you can barely see. This zinc plated pressed steel connector slides inside the tube ends; tighten the expanding screw and it grips the inside of both tubes along its full length, giving a straight, flush, non-slip joint with no welding, no sleeve and nothing on the outside. The price shown is for one splice lock, with a minimum order of 10.

Why use a splice lock
Invisible joint. Everything is inside the tube, so the rail looks like one continuous length.
Straight and strong. When tightened it presses on the inside of the tube in four places along its whole length, holding both tubes in line.
No hot work. Join rails on site with a drill and a hex key, ideal where welding is not allowed or the rail is already painted or galvanised.
Goes in as one piece. The two halves stay together while you push it in, so nothing drops inside the tube.
Where it is used
Joining lengths of tube in handrails, guard rails and balustrade top rails; pedestrian barriers and street furniture; key clamp frames and any tubular structure where a neat joint matters.
Single or double screw?
This is the single screw version: 96mm long with one screw, so only one access hole is needed. Choose it for knee rails, short runs and lighter duty joints; for top rails and long spans the double screw version locks each tube separately.
Specifications
| What you get | One single screw splice lock, minimum order 10 |
|---|---|
| Suits tube | 48.3mm outside diameter (40NB, 1 1/2 inch) |
| Tube wall | 2.6 to 4.0mm |
| Length | 96mm |
| Section | 36 x 30mm |
| Expanding screws | 1 x M10 hex socket, 35mm long, supplied fitted |
| Material | Pressed steel, zinc plated |
| Weight | 0.21kg |
Fitting
Cut both tube ends square and remove any burr. Drill one access hole for the hex key in one tube, 10mm from its end. Push the splice lock half way into that tube with the screw facing the hole, slide the second tube over the other half until the ends meet, then tighten the screw with a hex key through the hole. The screw expands the two halves against the inside of both tubes. Fill or plug the hole before painting.
All sizes
- 33.7mm, single screw, 96mm long
- 33.7mm, double screw, 153mm long
- 42.4mm, single screw, 96mm long
- 42.4mm, double screw, 153mm long
- 48.3mm, single screw, 96mm long (this one)
- 48.3mm, double screw, 153mm long
- 60.3mm, single screw, 96mm long
- 60.3mm, double screw, 153mm long
See all fittings in Handrails & Brackets.
Care
Once fitted the splice lock is sealed inside the tube. Paint or touch up the rail and the filled access holes as usual.
Frequently asked questions
Is the price for one splice lock?
Yes, one. The minimum order is 10.
Can it join two different tube sizes?
No. Both tubes must be the same outside diameter.
Will it fit 48.3mm scaffold tube?
Yes, if the wall is between 2.6 and 4.0mm, which covers standard 48.3mm steel tube.
Can it be used on a bend?
No. It joins straight tube end to end. For corners use a weld bend or a key clamp elbow.
Ordering and delivery
Order 10 or more online with Express UK Delivery. For a full handrail, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will list the tube, joints and fittings you need.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Minimum order 10 pcs






