-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
One full 3 metre length of satin 316 stainless steel round tube, 48.3mm outside with a heavy 2.6mm wall, ready to cut to size on site. The thicker wall makes this the heavy-duty version of the standard 48.3mm rail tube, for guard rails, barriers, stadium and station handrails and long spans where a stiffer, tougher rail is wanted. 316 is the marine grade, the one to choose outdoors, by the sea, round pools and anywhere salt or de-icer is spread. The price shown is for one 3 metre length.

Specifications
| Material | 316 stainless steel |
|---|---|
| Finish | Satin (brushed) all round |
| Outside diameter | 48.3mm |
| Wall | 2.6mm |
| Bore | 43.1mm |
| Length | 3000mm, one piece, square cut ends |
| Weight | About 3.0 kg a metre, about 9 kg the length |
| Fits | 48.3mm handrail brackets, saddles and tube clamp fittings; push-in end caps, bends and connectors made for 48.3 x 2.6mm tube |
Why choose this tube
Heavy 2.6mm wall. Against the common 2.0mm wall tube of the same size it is about 25% stiffer and has 30% more steel in the wall, so it sags less between posts, shrugs off knocks from trolleys and crowds, and gives a weld more metal to take.
316 grade, for outdoors and the coast. 316 contains molybdenum, which makes it far more resistant to salt spray, chlorine and road salt than 304. Use it on seafronts, harbours, piers, pool surrounds, car parks and gritted entrances, where 304 can tea-stain within a season.
Satin finish that matches the fittings. The brushed finish hides fingerprints and light scratches, and matches satin 48.3mm brackets, posts and end caps, so the whole rail looks like one job.
Where it is used
- Handrails and crowd barriers at stadiums, stations and busy public steps
- Guard rails and two-rail barriers along quays, walkways and loading areas
- Long-span rails between widely spaced posts
- Frames, stands, boat rails and heavier fabrication work
Cutting and fitting
Cut it with a fine-tooth hacksaw, a chop saw with a stainless blade or a pipe cutter, then take the burr off inside and out with a file. Push-in fittings must be the 48.3 x 2.6mm versions, because the bore is smaller than 2.0mm wall tube. On a wall-mounted handrail fit a bracket every 1 metre or so, with one within about 300mm of each end. Use stainless fixings, ideally 316, so steel on steel does not stain. If you weld it, use 316 filler and clean the weld afterwards.
Care
Before handover, clean off fingerprints, swarf and any marks from cutting, because tiny steel particles left on the surface can rust and stain. Outdoors, rinse with fresh water and wipe along the grain every few weeks, more often near the sea or a pool. If light brown tea staining appears, remove it with white vinegar or a stainless steel cleaner on a soft microfibre cloth, wiping with the grain. Never use wire wool, steel brushes or chlorine bleach.
Is this the right tube?
| Your situation | Choose |
|---|---|
| Heavy-duty 48.3mm rail outdoors | This 316 tube, 2.6mm wall |
| Standard 48.3mm rail outdoors | 316 tube 48.3mm x 2.0mm |
| Standard 42.4mm handrail outdoors | 316 tube 42.4mm x 2.0mm |
| Return ends for this tube | 316 return end 48.3 x 2.6mm |
| Domed end caps for this tube | 316 domed end cap 48.3 x 2.6mm |
Frequently asked questions
Is the price for one length?
Yes, one 3 metre length. Order as many lengths as the run needs and join them with 48.3 x 2.6mm connectors.
Can I cut it?
Yes. It is supplied as one 3000mm length for you to cut to suit on site with a hacksaw, chop saw or pipe cutter.
2.0mm or 2.6mm wall?
2.0mm wall suits most handrails. Choose 2.6mm for crowd barriers, long spans, heavy use or where you are welding. Keep to one wall thickness on a run so the push-in fittings match.
Do 48.3mm tube clamp fittings fit?
Yes. The outside is 48.3mm, the common size for tube clamp fittings. Use stainless fittings outdoors.
Ordering and delivery
Order online for Express UK Delivery, with same-day dispatch on orders before 2pm, Monday to Friday. For a long run, a full rail with brackets and end caps, or a quantity price, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm lengths, availability and delivery before you order.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.



