-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
A 50ml bottle of high strength retaining adhesive for bonding push-in stainless steel handrail fittings into tube, without welding. A thin film on the spigot of an elbow, end cap, return end or connector locks it permanently into the tube bore, so a rail can be assembled on site with no welding, grinding or repolishing. One bottle does about 50 to 60 joints on 42.4mm or 48.3mm handrail. The price shown is for one 50ml bottle.

What you get
| Sold as | One 50ml bottle with a fine nozzle |
|---|---|
| Type | High strength retaining compound, cures in the closed joint |
| Covers | About 50 to 60 joints on 42.4mm or 48.3mm handrail |
Why choose this adhesive
No welding on site. Bonded push-in fittings mean no hot works permit, no welding kit and no grinding back and repolishing of the satin finish, so a stainless rail goes up faster and looks cleaner.
Made for close-fitting joints. It cures once the fitting is pushed home and the air is shut out, filling the small gap between the spigot and the tube bore and locking them together.
Plenty for a job. One small bottle bonds the elbows, ends and connectors of a typical domestic or commercial handrail run several times over.
How to bond a fitting
- Cut the tube square and take the burr off inside and out.
- Make sure the tube bore and the spigot are clean and dry.
- Apply a thin film of adhesive round the spigot.
- Push the fitting fully home, turning it slightly to spread the adhesive, and line it up.
- Hold it under pressure for a few seconds until the bond forms.
- Wipe away any squeeze-out with a dry cloth.
- Leave it to cure fully before the rail takes any load.
Cure is slower on stainless steel and in cold weather, below about 15°C, so allow longer on a cold site.
Specifications
| Contents | 50ml |
|---|---|
| Use | Bonding push-in stainless steel handrail fittings into tube |
| Suits | 42.4mm and 48.3mm handrail fittings |
| Coverage | About 50 to 60 joints |
| Weight | About 0.08 kg |
Fittings to bond with it
| You need | See |
|---|---|
| A closed rail end | 316 return end 48.3 x 2.6mm |
| A rounded post top | 316 domed end cap 48.3 x 2.6mm |
| A corner in the rail | 316 radiused 90 degree elbow 48.3 x 2.0mm |
| To join two lengths | 316 tube connector 42.4 x 2.0mm |
Safety
The bottle carries hazard warnings. Read the label before use, wear gloves, avoid contact with skin and eyes, and keep it out of the reach of children. Store it upright with the cap on, in a cool place.
Frequently asked questions
Is the price for one bottle?
Yes, one 50ml bottle, enough for about 50 to 60 joints.
Will it fill a loose joint?
It is made for close-fitting push-in fittings. Use fittings sized for your tube wall, for example 48.3 x 2.6mm fittings in 2.6mm wall tube, so the spigot is a close fit in the bore.
Can I still weld instead?
Yes. The push-in fittings can be welded too; the adhesive simply saves welding on site.
Ordering and delivery
Order online in any quantity, with Express UK Delivery and same-day dispatch on orders before 2pm, Monday to Friday. For a full handrail with tube, fittings and adhesive, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm the parts and delivery before you order.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.




