Bow Scroll Panel 470 x 1000mm, 12 x 6mm Textured Flat Bar, for Gates, Railings and Window Grilles

A traditional scroll panel for gates, railings and window grilles. This upright panel is 1000mm tall and 470mm wide, made from 12 x 6mm flat bar with a lightly hammered texture. Two straight outer uprights and a straight centre bar run the full height, with short plain ends for welding. A cross rail near the top carries a frieze of curled C scrolls, and a second cross rail sits near the bottom. Between them, a bottle-shaped frame wraps the centre bar, with a bow of two round loops tied by a forged collar in the middle and large S scrolls with curled ends filling each side. It is 12mm deep and weighs about 6.1kg. Weld it into the middle of a gate or a railing bay, or fit it as a decorative window grille. It comes in raw steel, ready to fit and finish. The price shown is for one panel.

Why fabricators use it

A ready-made gate centre. At 470mm wide it fills the middle of a 1 metre pedestrian gate, with plain bars either side, so most of the scrollwork is done for you.

Its own frame. The outer uprights and cross rails hold every scroll in place, so the panel is rigid and easy to handle, square up and weld.

Textured bar. The hammered surface gives a hand-forged look and helps paint and powder coat key to the steel.

Mild steel takes any finish. Paint it, powder coat it or have it hot-dip galvanised so it matches the rest of the job.

Where it is used

Pedestrian and side gates, pairs of driveway gates, front garden railing feature bays, ground floor window grilles, door side panels, balcony fronts and garden screens.

Specifications

How many do you need?

Choosing the right panel

This panel suits a gate at least 700mm wide. For a narrower or lighter design, compare:

• 380 x 1000mm scroll panel with cast palm ornaments
• 345 x 790mm leaf scroll panel
• 360 x 900mm S scroll panel
• 275 x 900mm lattice knot panel

See every design in our decorative panels range.

Stairs, landings and balconies in homes: the gaps in the guarding must not let a 100mm sphere pass. Some spaces in this panel are larger than 100mm, so for guarding, back it with bars or mesh.

Fitting and care

Measure the clear height between your rails and trim the plain upright ends to suit, taking the same off each end. Offer the panel up, check it is plumb and central, tack the uprights to the bottom rail and the top rail, then weld out and dress the welds. As a window grille, fix through the outer uprights into the reveals with security anchors. Raw steel will rust if left bare, so finish it the same day or keep it dry. Outdoors, have it hot-dip galvanised, or degrease, prime with a zinc-rich or etch primer and top coat with metal paint.

Frequently asked questions

Ordering and delivery

Order online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For several pieces, mixed parts or a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.