Trolley Track Hanger Bracket, Face Fix, Galvanised

A face fix hanger bracket for trolley gate track. The galvanised steel bracket bolts to the face of a wall, post or beam through its slotted back plate, and the trolley track clamps into its jaw with the screw. A trolley gate or door hangs from an overhead galvanised C-section trolley track: hanger brackets hold the track to a wall, beam or ceiling, the trolley wheels run inside it, and the gate hangs below, so nothing runs on the ground. The price is for one, with a minimum order of 5.

Specifications

Why it works

Holds the track firm. The clamp screw locks the track in the jaw, so it cannot slide or twist.

Adjustable. Slotted holes let you line the track up before tightening.

Galvanised. Protected against rust outdoors.

Where it is used

• Top-hung sliding gates
• Sliding barn, stable and garage doors
• Sliding doors on sheds, stores and workshops
• Replacing worn trolley wheels or brackets

Choosing the right parts

Every part runs in the same standard trolley track. Use two wheel carriages per gate or door, hanger brackets along the track, and trolley track end stops at each end.

Fitting and care

Fix the hanger brackets level along the line of the opening, about a metre apart, and clamp the trolley track into them. Slide the wheel carriages in, fit trolley track end stops at each end so the carriages cannot run out, then hang the gate or door and adjust it level. Keep the track clear of debris.

Frequently asked questions

Ordering and delivery

Order online for Express UK Delivery, with same-day dispatch on orders placed before 2pm, Monday to Friday. For larger quantities, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm stock and delivery before you order.