Trolley Gate Wheel Carriage, Double 44mm Wheels, M12, Galvanised

A double wheel trolley carriage for top-hung sliding gates and doors. It is a galvanised steel trolley with two pairs of 44mm wheels on bearings, hanging on an M12 threaded bar with nuts. The wheels run inside the trolley track and the gate or door hangs from the threaded bar, which lets you set its height. A trolley gate or door hangs from an overhead galvanised C-section trolley track: hanger brackets hold the track to a wall, beam or ceiling, the trolley wheels run inside it, and the gate hangs below, so nothing runs on the ground. The price is for one.

Specifications

Why it works

Height adjustment. Wind the nuts on the threaded bar to raise or lower the gate and set it level.

Runs inside the track. The wheels are enclosed by the C-section, out of the weather and away from knocks.

Single or double. The double carriage spreads the load over four wheels for heavier gates and doors.

Where it is used

• Top-hung sliding gates
• Sliding barn, stable and garage doors
• Sliding doors on sheds, stores and workshops
• Replacing worn trolley wheels or brackets

Choosing the right parts

Every part runs in the same standard trolley track. Use two wheel carriages per gate or door, hanger brackets along the track, and trolley track end stops at each end.

Fitting and care

Fix the hanger brackets level along the line of the opening, about a metre apart, and clamp the trolley track into them. Slide the wheel carriages in, fit trolley track end stops at each end so the carriages cannot run out, then hang the gate or door and adjust it level. Keep the track clear of debris.

Frequently asked questions

Ordering and delivery

Order online for Express UK Delivery, with same-day dispatch on orders placed before 2pm, Monday to Friday. For larger quantities, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm stock and delivery before you order.