Google Top Quality Store — Verified Exceptional Shopping Experience

316 Stainless Steel Glass Holder 30mm for 42.4mm Post, 6-16mm Glass, Satin


Price:
Sale price£13.90
Inc. Vat

Express UK Delivery (2 Working Days)

In stock, ready to ship

Trusted by Industry Professionals

Description

A 316 stainless point fixing that holds a glass infill panel to a 42.4mm round post. A short saddle body, curved to sit tight on the post, takes an M8 bolt that passes through a drilled hole in the glass and is finished on the outside with a neat 30mm satin cap. Rubber washers either side keep the glass off the steel. It takes glass from 6 to 16mm thick. Use four per panel, two each side, for a clean post-and-glass balustrade. The price shown is for one glass holder, minimum order 8, enough for two panels.

Dimension drawing of the 316 30mm glass holder for a 42.4mm post: 30mm cap 6mm thick on an M8 x 45mm bolt, 26mm saddle body 13mm deep, two 29mm rubber washers, for 6 to 16mm drilled glass

What you get

Sold as One glass holder, minimum order 8
Parts 30mm cap on an M8 x 45mm bolt, 26mm saddle body curved for a 42.4mm post, two 29mm rubber washers
Material 316 stainless steel, satin, with rubber washers
Not included The post, the glass, and an M8 rivet nut if you use one

Why choose this glass holder

Neat and minimal. Only a small round cap shows on the glass, so the panel looks as if it floats between the posts. It suits balconies, stairs and terraces where you want an open view.

Made for round posts. The saddle body is curved to the 42.4mm post, so it sits firm with no rocking. For 48.3mm posts use the 316 glass holder for 48.3mm posts.

316 for outdoors. 316 stainless contains molybdenum, which gives it much better resistance to salt and chlorine than 304, so it suits balconies, coastal homes and pool areas.

Specifications

Material 316 stainless steel, satin finish
Fits 42.4mm round post
Glass 6 to 16mm toughened, drilled
Cap 30mm across, 6mm thick
Bolt M8 x 45mm
Saddle body 26mm across, 13mm deep, 9mm hole
Rubber washers Two, 29mm across with 13mm holes
Weight About 0.08 kg

Is this the right fixing?

Your post Choose
42.4mm round post This 316 glass holder
48.3mm round post 316 glass holder for 48.3mm
Flat post or wall 316 glass holder, flat back
Clamping glass without drilling it 316 D glass clamp for 42.4mm posts

Fitting

Have the glass toughened with the fixing holes already drilled, sized by your glass supplier for the bolt and washers. Mark the fixing positions on the posts, usually two per glass edge, then drill the post and either tap it M8 or fit an M8 rivet nut. Put the saddle body against the post, then build the fixing from the outside: cap and bolt, rubber washer, glass, rubber washer, body. Screw the bolt into the post and tighten until the glass is held firm. Do not over-tighten on the glass.

Safety. Use toughened or toughened laminated safety glass only. Post spacing, fixing positions, glass type and fixings for a guarding balustrade must be set by whoever designs and signs off the job, to BS 6180 where it applies.

Care

Outdoors, rinse with fresh water and wipe along the grain every few weeks, more often near the sea or a pool, so salt and chlorine do not leave brown tea staining. Use warm soapy water; avoid chlorine bleach, wire wool and scouring pads.

Frequently asked questions

Is the price for one glass holder?

Yes, one complete fixing. The minimum order is 8, enough for two panels at four fixings each.

Does the glass need drilling?

Yes. Each fixing passes through a hole in the glass, which must be drilled before the glass is toughened.

What glass thickness does it take?

From 6mm up to 16mm, including toughened laminated glass.

How does it fix to the post?

The M8 bolt screws into the post, which is drilled and tapped M8 or fitted with an M8 rivet nut.

Ordering and delivery

Order online in any quantity from 8, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a full glass balustrade with posts, fixings and handrail, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm the parts and delivery before you order.

Our products have been used by

Logos are for illustrative purposes only and do not imply official endorsement

About Us

Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Klarna Maestro Mastercard Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

316 Stainless Steel Glass Holder 30mm for 42.4mm Post, 6-16mm Glass, Satin

£13.90 Inc. Vat

You may also like

Recently viewed