-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
This compact D clamp holds a glass panel to the side of a 42.4mm round stainless post, for pool fences, balconies and stairs where you want the fittings to almost disappear. It is grade 316 (marine grade) stainless steel with a satin brushed finish, 50 x 40 x 26mm, and comes with rubber pads for 8mm and 10mm glass and an optional safety pin. Two countersunk screws close the halves round the glass edge. The price shown is for one clamp, with a minimum order of 8, enough for two panels.

Why use this clamp
Grade 316 for pools, coasts and gardens. 316 stainless contains molybdenum, which resists chlorine, salt air and de-icing salt far better than 304. Round a pool or by the sea it keeps its finish with simple cleaning.
Small and neat. At 50 x 40mm it is the compact D clamp in our range, about the height of the post is wide, so the glass and posts do the talking.
Safety pin option. The pin passes through a hole in the glass so the panel cannot slide out of the clamp even if a screw works loose. Use it where the glass has been drilled for it, or leave it out.
Shaped to the post, rubber round the glass. The back is curved to 42.4mm so it sits tight with no rocking. Glass never touches metal, which protects toughened glass from point loads.
Where it is used
Pool fences and hot tub screens; glass balustrades on balconies, terraces, decks, stairs and landings; and glass infill in stainless handrails in homes, hotels, shops and offices.
Specifications
| What you get | One clamp: front and back halves, two closing screws, rubber pads for 8mm and 10mm glass, safety pin. Minimum order 8 |
|---|---|
| Size | 50 x 40 x 26mm |
| Suits post | 42.4mm round tube (back curved to suit) |
| Glass thickness | 8mm or 10mm |
| Material | Grade 316 stainless steel |
| Finish | Satin brushed |
| Safety pin | Included, optional (needs a hole in the glass) |
| Fixing to the post | Not supplied. One screw through a hole drilled in the post into the back half |
| Weight | About 0.20 kg |
Which glass clamp to choose
| You need | Clamp |
|---|---|
| Compact D, 316, 42.4mm post | This clamp |
| Compact D, 316, flat post or wall | 316 D clamp 50 x 40mm, flat back |
| Compact D, indoor, lower cost | 304 D clamp 50 x 40mm for 42.4mm |
| 12mm glass or a bigger clamp | 316 D clamp 63 x 45mm for 42.4mm |
| Square shape | 316 square clamp for 42.4mm |
| Black finish | Black D clamp for 42.4mm |
How many do you need?
Most panels are held by four clamps, two on each post, set about 150 to 200mm in from the top and bottom of the glass. A run of three panels between four posts takes 12. Tall or wide panels may need a third clamp each side; follow your glass supplier's or designer's layout.
Choosing the right option
Measure across the post: 42.4mm tube is often sold as 1 1/4" nominal bore. Check the glass is 8mm or 10mm; for 12mm glass use the 63 x 45mm D clamp. If you want the safety pin, order your toughened glass with the holes drilled before toughening, matched to the pin. Pick 316 for pools, coasts and gardens, and 304 only for dry indoor work. For a ready-made post with clamps, see the 316 glass balustrade mid post kit for 42.4mm.
Fitting and care
Mark the clamp heights on every post with a level line. Drill the post, fix the back half with one screw through the post, then fit the rubber pads for your glass. Set the glass on packers, fit the pin if used, offer up the front half and tighten the two countersunk screws evenly until the glass is gripped firmly, without overtightening. Use toughened safety glass only. Wipe with warm soapy water and a soft cloth; by a pool, rinse with fresh water every few weeks to keep the satin finish bright.
Frequently asked questions
Is the price for one clamp?
Yes. The price is for one complete clamp with both halves, two screws, the rubber pads and the pin. The minimum order is 8, which holds two panels.
Do I have to use the safety pin?
No. It is optional. Use it only if your glass has a hole drilled for it; otherwise the clamp grips the glass on the rubbers alone.
Is it suitable for a pool fence?
Yes. Grade 316 resists chlorinated water and splash far better than 304. Rinse it now and then with fresh water.
Can I use it on 12mm glass?
No, it takes 8mm or 10mm glass. For 12mm use the 316 D clamp 63 x 45mm.
Is the screw that fixes it to the post included?
No. It comes with its two closing screws only. The post screw depends on your post wall and fixing method.
Ordering and delivery
Order 8 or more online with Express UK Delivery and same-day dispatch on orders before 2pm, Monday to Friday. For a full pool fence or balustrade, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will check quantities and delivery before you order.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Minimum order 8 pcs






