-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
This D type clamp holds a glass panel up to 12mm thick to the side of a 42.4mm round stainless post, in marine grade stainless steel for outdoor and poolside balustrades. It is grade 316 stainless steel with a satin brushed finish, 63 x 45 x 30mm in the classic rounded D outline, with a back curved to suit 42.4mm tube, rubber pads for 8mm, 10mm and 12mm glass and an optional safety pin. Two countersunk screws close the two halves round the glass edge. The price shown is for one clamp, with a minimum order of 8, enough for two panels.

Why use this clamp
Grade 316 for outdoor and coastal work. 316 stainless contains molybdenum, which resists the chlorides in sea air, pool water and de-icing salt far better than 304. On a roof terrace, balcony or pool surround it keeps its finish with simple cleaning.
Takes 12mm glass. The full-size D body grips 8mm, 10mm or 12mm toughened glass with the matching rubbers. Thicker glass is stiffer between posts and is often specified for wider panels and busier areas.
Shaped to the post. The back is curved to 42.4mm, so the clamp sits tight on the tube with no rocking and no gap to collect dirt. A clamp made for the post size is what keeps the glass straight from post to post.
Safety pin option. The pin sits inside the clamp and passes through a hole in the glass, so the panel cannot slide out even if a screw works loose. Use it where the glass is drilled for it, or leave it out.
Where it is used
Glass balustrades on round-post decks, balconies, terraces and stairs; pool and hot tub screens; glass infill in stainless handrails; and coastal and riverside balustrades where 12mm glass is specified.
Specifications
| What you get | One clamp: front and back halves, two closing screws, rubber pads for 8mm, 10mm and 12mm glass, safety pin. Minimum order 8 |
|---|---|
| Size | 63 x 45 x 30mm, D shape |
| Suits post | 42.4mm round tube (back curved to suit) |
| Glass thickness | 8mm, 10mm or 12mm |
| Material | Grade 316 stainless steel |
| Finish | Satin brushed |
| Safety pin | Included, optional (needs a hole in the glass) |
| Fixing to the post | Not supplied. Usually one M8 stainless screw into a drilled and tapped post |
| Weight | About 0.33 kg |
Which glass clamp to choose
| You need | Clamp |
|---|---|
| D clamp, 316, 42.4mm post, up to 12mm glass | This clamp |
| D clamp, 316, 48.3mm post | 316 D clamp for 48.3mm |
| D clamp, 316, flat post or wall | 316 D clamp 63 x 45mm, flat back |
| Smaller D clamp, 316, 42.4mm post, 8-10mm glass | 316 D clamp 50 x 40mm for 42.4mm |
| Square shape, 316, 42.4mm post, up to 12mm glass | 316 square clamp 55 x 55mm for 42.4mm |
| Black finish, 42.4mm post | Black square clamp for 42.4mm |
| To powder coat to a colour | Zinc D clamp for 42.4mm |
How many do you need?
Most panels are held by four clamps, two on each post, set about 150 to 200mm in from the top and bottom of the glass. A run of three panels between four posts takes 12. Tall or wide panels may need a third clamp each side; follow your glass supplier's or designer's layout.
Choosing the right option
Measure across the post: 42.4mm tube is often sold as 1 1/4" nominal bore, and this clamp will not sit tight on any other size. Fit the rubber pads to match your glass: 8mm, 10mm or 12mm. If you want the safety pin, order the glass with holes drilled before toughening, matched to the pin position. Choose this full-size D clamp for 12mm glass; for 8mm or 10mm glass the smaller 50 x 40mm D clamp is neater. Choose 316 for outdoors, coastal sites and pools.
Fitting and care
Mark the clamp heights on every post with a level line. Drill and tap the post, fix the back half, then fit the rubber pads for your glass. Set the glass on packers, fit the pin if used, offer up the front half and tighten the two countersunk screws evenly until the glass is gripped firmly, without overtightening. Use toughened safety glass only. Wipe with warm soapy water; on the coast or by a pool, a fresh-water rinse every few weeks keeps the satin finish bright. Do not use wire wool or chloride cleaners.
Frequently asked questions
Is the price for one clamp?
Yes. The price is for one complete clamp with both halves, two screws, the rubber pads and the safety pin. The minimum order is 8, which holds two panels.
Is the safety pin included?
Yes, it comes with the clamp. It is optional: use it only if your glass has a hole drilled for it, made before the glass is toughened.
Can I use it outdoors?
Yes. Grade 316 is the right choice outdoors, near the sea and round pools. Rinse it with fresh water now and then to keep the finish bright.
Will it fit a square post?
No. The back is curved for 42.4mm tube. For square posts, box section or walls use the 316 D clamp 63 x 45mm with a flat back.
Ordering and delivery
Order 8 or more online with Express UK Delivery and same-day dispatch on orders before 2pm, Monday to Friday. For a full balustrade, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will check quantities and delivery before you order.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Minimum order 8 pcs






