Magnet Lock for Swing Gates, 250kg Holding Force, 12/24V DC, IP68, Black

A concealed magnet lock for swing gates, in black, holding 250kg at 12V or 24V DC. This is the option for a controlled gate where you want the lock out of sight and the full width of the opening kept clear. The magnet fixes to the post and the armature plate to the gate, and it can be installed so that very little shows from the outside. Fitting uses a quick-fit system, so a neat result does not need a welder. Rubber bumpers stop the gate shaking and protect the gate and its fittings from harsh handling, and a flexible armature mount lets the plate seat properly even if the gate is not perfectly aligned. It is IP68 rated and its two-layer coating has been tested to 500 hours of salt spray to ISO 9227.

Why this lock works

The opening stays clear. Because the lock can be concealed in the frame, you keep the full passage width. That matters on gates used by wheelchairs, prams and trolleys.

Forgiving of alignment. Swing gates move with the seasons. The flexibly mounted armature plate seats squarely on the magnet, so a small misalignment does not cost you holding force.

Tested holding force. Each magnet is checked for its holding force, with a minimum pulling force of 2500N, which is 250kg.

Weatherproof. It is IP68 rated against water and dust and has a two-layer protective coating developed for outdoor use, with a kick-off system to deal with residual magnetism on release.

Where it is used

Controlled swing gates on offices, schools, apartment blocks and leisure sites, working from a keypad, a reader or an intercom. It needs a 12V or 24V DC supply and a controller. This model is for swing gates. The sliding gate version is a separate part with a slimmer cover.

Specifications

Choosing the right magnet lock

Pick by gate type first. This one is for swing gates. If your gate slides, you need the sliding version, which has a much slimmer cover at 62 x 31mm against the 81 x 71mm here. If you want handles and a higher holding force, look at the bolt-on electromagnetic lock in the table. The colour is the only difference between this and the silver swing gate magnet.

Fitting and care

Mark out the post and the gate so that the magnet and plate meet flat with the gate closed, then fix each half with the supplied fittings and cable the magnet back to your controller. Electrical work must be done by a competent person. Check the wiring before you power it up, and test that the magnet holds and releases properly. Check the rubber bumpers are making contact so that the gate does not rattle.

Wipe the magnet face and plate clean regularly, because dirt on the faces reduces holding force. Inspect the cable and the fixings at routine maintenance.

Frequently asked questions

Ordering and delivery

Order online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.