-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
A ready-made hoop top railing panel for parks, schools, verges and front gardens. Each panel is 1724mm long and 1 metre high, with seven hoops of 16mm solid round bar welded between two 40 x 8mm flat rails. That gives fourteen uprights at 116mm centres, leaving a clear gap of about 100mm between bars. The flat rails have slotted ends so the panel bolts straight onto hoop top posts, with no welding on site. It is supplied in self colour, uncoated mild steel, ready to prime and paint in the colour you need. The price shown is for one panel; posts are sold separately.

Why hoop top panels work
Ready to bolt up. The panel arrives fully welded. Stand it between two posts, line up the slotted rail ends with the post brackets and bolt it on. A run goes up quickly with a spanner and a level.
Solid 16mm bar. Solid round bar, not tube, so the hoops stand up to knocks from mowers, bikes, footballs and people leaning on them, and they do not dent or rust through from inside.
Rounded tops. There are no spikes or spears, which is why hoop top railing is the usual choice around play areas, schools, parks and public paths.
About 100mm between bars. The 116mm centres leave roughly a 100mm clear gap, small enough to stop most dogs and young children slipping through.
Paint it any colour. Self colour steel takes primer and metal paint well, so you can match council green, black or a corporate colour. If you want a galvanised finish from the start, choose the galvanised version below.
Where it is used
Park and flower bed edging, grass verges, school and nursery boundaries, play area surrounds, front garden boundaries, car park landscaping, churchyards, hospital and office grounds, and public paths where a low, friendly barrier is needed.
Specifications
| What you get | One welded hoop top fence panel (posts not included) |
|---|---|
| Length | 1724mm over the rails |
| Height | 1000mm |
| Hoops | 7 hoops, 14 uprights, rising 125mm above the top rail |
| Bar | 16mm solid round bar at 116mm centres |
| Rails | 40 x 8mm flat bar, top and bottom, slotted ends |
| Material | Mild steel, fully welded |
| Finish | Self colour (uncoated raw steel) |
| Weight | About 30 kg |
How many do you need?
Each panel covers roughly 1.75m of fence including its share of a post. You need one more post than panels on a straight run:
| Straight run | Panels | Posts |
|---|---|---|
| 5 metres | 3 | 4 |
| 10 metres | 6 | 7 |
| 20 metres | 12 | 13 |
| 50 metres | 29 | 30 |
Add a post at every corner and change of direction. Confirm the post centres for your chosen post before setting the first one.
Choosing the right panel and posts
- Galvanised 16mm hoop top panel, 1724 x 1000mm: the same panel hot-dip galvanised, for low maintenance
- Galvanised 12mm hoop top panel, 1656 x 1000mm: lighter bar for lower-risk edging
- Hoop top panel post to bolt down, 1100mm, self colour: for hard surfaces such as paving and concrete
- Hoop top panel post to concrete in, 1500mm: for setting into the ground
- Single 16mm hoops, 1000mm high: to build your own lengths and gates
See the full hoop top fencing range.
Installation and care
Set out the run with a string line. Fix the first post plumb, bolt the first panel to it, then set the next post to the panel end so the spacing is always right. For posts to concrete, dig holes about 500mm deep and support the posts until the concrete has set. For bolt-down posts, use anchors suited to the base. Before fitting, clean off any mill scale and oil, prime with a zinc-rich or red oxide metal primer and apply two coats of metal paint, including inside the slots and under the rails. Touch up any chips after fitting, and check bolts and paintwork once a year.
Frequently asked questions
Does the price include posts?
No. The price is for one panel. Choose bolt-down or concrete-in posts from the links above, one more post than the number of panels.
Is it painted?
No. It is self colour, uncoated mild steel. It needs priming and painting, or galvanising, before use outdoors. The galvanised version is listed above.
Can it follow a slope?
On a gentle slope you can step the panels, setting each one a little lower than the last. The panel is welded square, so it does not rake to follow a steep slope.
Can I cut a panel to fit a short gap?
Yes. Cut through the rails between two hoops, keeping a hoop complete, then drill or slot the new rail ends and paint the cut steel. A grinder with a cutting disc does the job.
How heavy is it to handle?
About 30 kg and 1.7m long, so it is a two-person lift for fitting.
Ordering and delivery
Order online with Express UK Delivery and same-day dispatch on orders before 2pm, Monday to Friday. Due to the weight and bulk of this panel, additional carriage charges may apply. For a full run of panels and posts, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.






