-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
A ready-made, hot-dip galvanised hoop top panel for schools, parks, play areas and verges. Each panel is 1724mm long and 1 metre high, with seven hoops of 16mm solid round bar welded between two 40 x 8mm flat rails, giving fourteen uprights at 116mm centres and a clear gap of about 100mm between bars. The whole panel is hot-dip galvanised after welding, so it can go straight in with no painting. Slotted rail ends bolt directly onto hoop top posts. The price shown is for one panel; posts are sold separately.

Why galvanised hoop top panels
No painting needed. Hot-dip galvanising coats every surface, inside the welds and around the hoops, with zinc. It protects the steel for many years outdoors with no primer or top coat, which saves a site visit and keeps maintenance to a minimum.
Solid 16mm bar. Solid round bar stands up to knocks from mowers, footballs and people leaning on it, and cannot rust through from inside like thin tube.
Rounded tops, no spikes. The usual choice around play areas, schools and public paths, where spears and finials are not wanted.
Bolt-up installation. Fully welded panels with slotted rail ends bolt straight to posts with a spanner, so a run goes up quickly with no hot work on site.
Where it is used
School and nursery boundaries, playground and sports field edges, park and flower bed edging, grass verges, car park landscaping, housing estates, churchyards and public open spaces.
Specifications
| What you get | One welded, galvanised hoop top fence panel (posts not included) |
|---|---|
| Length | 1724mm over the rails |
| Height | 1000mm |
| Hoops | 7 hoops, 14 uprights, rising 125mm above the top rail |
| Bar | 16mm solid round bar at 116mm centres |
| Rails | 40 x 8mm flat bar, top and bottom, slotted ends |
| Material | Mild steel, fully welded |
| Finish | Hot-dip galvanised |
| Weight | About 30.5 kg |
How many do you need?
Each panel covers roughly 1.75m of fence including its share of a post. You need one more post than panels on a straight run:
| Straight run | Panels | Posts |
|---|---|---|
| 5 metres | 3 | 4 |
| 10 metres | 6 | 7 |
| 20 metres | 12 | 13 |
| 50 metres | 29 | 30 |
Add a post at every corner and change of direction, and confirm the centres for your chosen post before setting the first one.
Choosing the right panel and posts
- Self colour 16mm hoop top panel, 1724 x 1000mm: the same panel in raw steel, to paint any colour
- Galvanised 12mm hoop top panel, 1656 x 1000mm: lighter bar for lower-risk edging
- Galvanised hoop top panel post to bolt down, 1100mm: for paving and concrete
- Hoop top panel post to concrete in, 1500mm: for setting into the ground
See the full hoop top fencing range.
Installation and care
Set out the run with a string line. Fix the first post plumb, bolt the first panel to it, then set the next post to the panel end so the spacing is always right. For posts to concrete, dig holes about 500mm deep and support the posts until the concrete has set. For bolt-down posts, use anchors suited to the base. If you cut a panel, treat the cut ends with zinc-rich paint. Galvanising needs no routine painting; if you want a colour, use an etch primer made for galvanised steel first. Check the bolts once a year.
Frequently asked questions
Does the price include posts?
No. The price is for one panel. Choose galvanised bolt-down posts or concrete-in posts from the links above, one more post than the number of panels.
Can I paint it?
Yes, but paint will not stick to fresh galvanising on its own. Let it weather for a few months or use a T-wash or etch primer made for galvanised steel, then top coat.
Can it follow a slope?
On a gentle slope you can step the panels, setting each one a little lower than the last. The panel is welded square, so it does not rake to follow a steep slope.
Can I cut a panel to fit a short gap?
Yes. Cut through the rails between two hoops, keeping a hoop complete, slot the new rail ends and protect the cut steel with zinc-rich paint.
How heavy is it to handle?
About 30.5 kg and 1.7m long, so it is a two-person lift for fitting.
Ordering and delivery
Order online with Express UK Delivery and same-day dispatch on orders before 2pm, Monday to Friday. Due to the weight and bulk of this panel, additional carriage charges may apply. For a full run of panels and posts, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.




