-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Need a different strength? Compare the range
See all ground protection mats- 5tonne Lightweight board Walkways, marquees, cars on firm ground £141.90
- 10tonne Interlocking rubber mat Event walkways, marquee floors, paths From £45.00
- 20tonne Medium duty mat Cars, vans, mini diggers, lawns From £116.90
- 60tonne HDPE trackway 15mm Excavators, tippers, haul roads From £123.90
- This mat80tonne Heavy duty HDPE mat Heavy plant, cranes, HGV routes £288.90
Description
The 8 x 4 heavy-duty access mat that keeps tracked plant, telehandlers and delivery wagons moving when the ground gives up. Each 2.4m x 1.2m board is pressed from 12mm solid high-density polyethylene. It spreads a machine's weight over almost three square metres, so wheels and tracks stay on top of soft clay, wet turf and made ground instead of rutting into it. Lay a run in minutes, drive on it straight away, lift it at the end of the job and leave the grass behind you intact.
Why site teams choose this mat
- Rated for 80 tonnes, tested to 120 tonnes. That covers 13 to 20 tonne excavators, loaded telehandlers, mobile crane outriggers, concrete wagons and articulated deliveries, depending on ground conditions.
- Grips when it is wet. A raised chevron tread runs in four zones across the face, giving tyres and boots traction in rain and mud. There is no slick, flat face to slide on.
- Light enough to lay by hand. At 35kg, two operatives can carry and position a mat using the six moulded handholes, with no lifting equipment needed on site.
- Builds a continuous roadway. Twelve pre-drilled connection holes let you lock mats side to side and end to end with standard 2-way or 4-way mat connectors, so the route does not creep apart under turning loads.
- Will not rot, splinter or absorb water. Unlike timber bog mats, HDPE does not swell, warp or carry contamination between sites. Jet-wash it clean and it is ready for the next job.
- Made from recycled plastic. Each board is 100% recycled HDPE, around 900 bottles' worth, and fully recyclable at the end of its working life.
Where it earns its keep
Groundworks and housing sites where plant must cross finished lawns or soft verges. Utility and cable-laying crews working across farmland. Tree surgeons getting a chipper and MEWP to the back of a garden. Event organisers building vehicle routes, car parks and production compounds on showground grass. Crane hire firms needing a stable, level base under outrigger pads. Anywhere the job needs firm access today and the ground has to be handed back undamaged tomorrow.
How many mats do I need?
Each mat covers 2.88m². For a single-lane roadway, lay the mats with the 2.4m length across the route: every mat adds 1.2m of road, so a 10m access run takes 9 mats and a 25m run takes 21. For a hardstanding or crane pad, divide the area in square metres by 2.88 and round up. If in doubt, send us your route length and the heaviest vehicle using it and we will work out the quantity for you.
Laying tips from the field
- Strip loose debris and level obvious ridges so each mat sits flat with full ground contact.
- Lay mats butt-jointed, never overlapped, and connect them through the pre-drilled holes before the first vehicle crosses.
- Drive steadily and avoid sharp tracked turns on the mats; pivot-steering under load is what damages boards and connectors.
- On very soft ground, double up with a second layer at 90 degrees under the wheel path to spread the load further.
Specification
| Size | 2400mm x 1200mm (8ft x 4ft) |
| Thickness | 12mm solid |
| Coverage | 2.88m² per mat |
| Weight | 35kg per mat |
| Load rating | 80 tonnes suggested, tested to 120 tonnes (ground dependent) |
| Material | 100% recycled high-density polyethylene (HDPE), fully recyclable |
| Surface | Anti-slip chevron tread |
| Handholes | 6 |
| Connection holes | 12 (connectors not included) |
| Colour | Black |
| Condition | New |
| Delivery | Palletised, up to 30 mats per pallet. Larger orders need offloading by forklift or HIAB on arrival. |
Frequently asked questions
Will these mats carry a 20 tonne excavator?
Yes. The mat is rated for 80 tonnes and tested to 120 tonnes. On very soft or waterlogged ground, add a second layer under the tracks.
Can I drive a car or van straight onto them?
Yes. The tread gives tyres grip from the first mat, and the 12mm profile is low enough to drive on without ramps.
Do they protect lawns?
They spread the load so the grass is pressed rather than cut and rutted. For short jobs, the turf usually recovers within days of the mats being lifted.
How do I join them together?
Use standard 2-way connectors along straight runs and 4-way connectors where four corners meet, bolted through the pre-drilled connection holes.
How long do they last?
HDPE does not rot or absorb water, so with sensible use a mat gives many years of repeated deployments. Avoid aggressive tracked pivot turns to get the longest life.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


