-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Need a different strength? Compare the range
See all ground protection mats- 5tonne Lightweight board Walkways, marquees, cars on firm ground £141.90
- 10tonne Interlocking rubber mat Event walkways, marquee floors, paths From £45.00
- 20tonne Medium duty mat Cars, vans, mini diggers, lawns From £116.90
- This mat60tonne HDPE trackway 15mm Excavators, tippers, haul roads From £123.90
- 80tonne Heavy duty HDPE mat Heavy plant, cranes, HGV routes £288.90
Description
Our thickest plastic trackway: 15mm of solid recycled HDPE, built for the jobs where lighter mats give up. Each 2.4m x 1.2m panel spreads the weight of excavators, articulated dumpers, crane outriggers and loaded HGVs across almost three square metres. Haul roads stay level, compounds stay clean, and plant keeps working on ground that would otherwise stop it.
Built for heavy plant
- Rated 60 tonnes, tested to 120 tonnes. Suggested working load is 60 tonnes, with weight testing up to 120 tonnes when laid on a suitable sub-base. Enough for 20 to 30 tonne excavators, 6-wheel tippers, concrete wagons and mobile crane set-ups.
- 15mm stiffness. The extra thickness over standard 12mm mats means less flex under point loads, so tracks and outrigger pads are carried on the surface instead of pushing the board into soft ground.
- Grip in all weather. A raised non-slip tread gives traction to tyres, tracks and boots in rain and mud.
- Two-person handling. Six moulded handholes on the full-size panel (four on the half size) make a 44kg mat a manageable two-person lift, with no lifting equipment needed to lay a run.
- Connects through the handholes. Panels lock together using hand-hole connectors, which also close the open holes to reduce trip hazards on pedestrian routes.
- Recycled and recyclable. Pressed from 100% recycled HDPE and fully recyclable. No rot, no splinters, no water absorption, so the mats can go from one site to the next after a jet-wash.
Full size or half size?
Full size (2.4m x 1.2m, 44kg) builds haul roads, crane pads and laydown areas with the fewest joints. Half size (2.4m x 0.6m, 22kg) fills the end of a run, narrows a route through a gateway, and lets you stagger joints for a stronger roadway.
Where it works
Civil engineering and housebuilding haul roads. Utility, rail and cable-route access across farmland. Crane and piling rig platforms. Solar farm and wind farm construction routes. Festival and showground service roads carrying production trucks. Any site where heavy plant has to cross soft ground and the land must be handed back undamaged.
How many mats do I need?
Each full-size mat covers 2.88m². For a single-lane haul road, lay the mats with the 2.4m length across the route: every mat adds 1.2m, so a 10m road takes 9 mats and a 50m road takes 42. For a crane pad or compound, divide the area in square metres by 2.88 and round up. Tell us your heaviest vehicle and route length and we will size it for you.
Laying tips from the field
- Grade out ridges and soft spots; for very heavy or long-term use, lay on a compacted sub-base or geotextile.
- Lay panels butt-jointed and stagger the joints using half sizes for extra strength.
- Fit hand-hole connectors before plant crosses so the road cannot creep apart.
- Avoid tracked pivot turns and wheel spin on the mats to give them the longest life.
Specification
| Full size | 2400mm x 1200mm x 15mm, 44kg, 2.88m² |
| Half size | 2400mm x 600mm x 15mm, 22kg |
| Load rating | Suggested 60 tonnes, tested to 120 tonnes (ground and sub-base dependent) |
| Material | 100% recycled high-density polyethylene (HDPE), fully recyclable |
| Handholes | 6 (full size) / 4 (half size) |
| Connection | Hand-hole connectors (not included) |
| Colour | Black |
| Delivery | Palletised and banded. Larger orders need offloading by forklift or HIAB on arrival. |
Frequently asked questions
Will these carry a 30 tonne excavator?
Yes, within the 60 tonne rating. On waterlogged ground, lay on a sub-base or double-layer the mats under the tracks.
Can HGVs and tippers use them?
Yes. They are designed as temporary roadway for loaded delivery and muck-away vehicles.
Why choose 15mm over 12mm?
Thicker panels flex less under concentrated loads such as tracks, outrigger pads and tipping wagons, which keeps the road flatter on soft ground.
How long will they last?
HDPE does not rot or absorb water. With sensible use and no aggressive pivot turns, the mats give many years of repeated deployments.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.







