Google Top Quality Store — Verified Exceptional Shopping Experience

Double Weld-On Glass Clamp, 160 x 40 x 6mm Mild Steel Strap with Two 40mm Discs, 8-12mm Glass


Price:
Sale price£14.90
Inc. Vat

Express UK Delivery (2 Working Days)

In stock, ready to ship

Trusted by Industry Professionals

Description

This double weld-on glass clamp holds the edges of two glass panels at one steel post, so a fabricated balustrade needs half the fixings at every intermediate post. It is a mild steel strap, 160 x 40 x 6mm, with a light zinc coating and a 40mm disc at each end. You weld the middle of the strap across the post; each end sits behind the edge of one panel, and its disc bolts through a hole in the glass, with rubber washers and a nylon sleeve so the glass never touches steel. It suits 8mm to 12mm toughened glass. The price shown is for one double clamp, with a minimum order of 6.

Dimension drawing of the double weld-on glass clamp, 160 x 40 x 6mm strap with two 40mm discs

Why use a weld-on clamp

One part for two panels. At every post between two panels, one double clamp does the job of two singles: one weld, one part to set out, and both panel edges held at exactly the same height.

Made for fabricated steelwork. On a welded staircase, balcony or mezzanine edge, welding a strap to each post is quicker and stronger than drilling and tapping posts for bolt-on clamps, and the strap becomes part of the frame.

A clean look on the glass. From the front you see only a 40mm round disc on each panel either side of the post. There is no clamp body wrapped round the glass edge, so the panels look lighter.

Glass never touches steel. A rubber washer sits each side of the glass and a nylon sleeve lines the hole, so the bolt and tab never bear on the toughened glass.

Paints with the frame. The light zinc coating protects the tab in store. After welding, prime and paint or powder coat the frame with the tabs in place, so everything finishes in one colour.

Where it is used

Glass infill panels in fabricated steel staircases, balconies, mezzanine edges and landings; glass screens fixed to steel frames in shops, offices and workshops; and industrial-style balustrades with flat bar or box section posts.

Specifications

What you get One double clamp: weld-on strap, two 40mm discs, two countersunk bolts, two dome nuts, four rubber washers and two nylon sleeves. Minimum order 6
Strap size 160 x 40 x 6mm, double
Discs Two, 40mm diameter
Glass thickness 8mm to 12mm toughened, drilled
Material Mild steel with a light zinc coating
Fixing Weld the middle of the strap to the post
Glass hole size Not published for this line; check the sleeve before ordering glass
Weight About 0.43 kg

Which weld-on clamp to choose

You need Clamp
Two panels meeting at one post This clamp
End post, one panel Short single weld-on clamp 80 x 40mm
End post, longer reach to the glass Long single weld-on clamp 120 x 40mm
Outside corner Outside corner weld-on clamp
Inside corner Inside corner weld-on clamp
Stainless steelwork 316 stainless short single weld-on clamp

How many do you need?

Use two double clamps on each post between two panels, one set about 150 to 200mm down from the top of the glass and one the same distance up from the bottom. A run of three panels between four posts takes four doubles on the two middle posts and four singles on the two end posts. Follow your glass supplier's or designer's layout for tall or wide panels.

Choosing the right option

Use doubles on every post where two panels meet in a straight line, and singles at end posts. For corners, use the outside or inside corner clamp. The glass must be drilled before it is toughened, so set out the clamp positions on the frame first and send the hole centres to your glass supplier. Use mild steel for painted or powder-coated frames; use the 316 stainless version on stainless steelwork or where the frame will not be coated.

Fitting and care

Tack the straps to the posts at the marked heights, check them against a straight edge so every panel will sit flat, then weld fully. Clean, prime and paint or powder coat the frame. Fit the nylon sleeve in the glass hole, place a rubber washer each side, offer the glass to the tabs, then fit the disc and bolt and tighten the dome nut evenly without overtightening. Use toughened safety glass only. Wipe with warm soapy water.

Frequently asked questions

Is the price for one double clamp?

Yes. The price is for one strap with both discs, bolts, nuts, washers and sleeves. The minimum order is 6.

Does the glass need a hole?

Yes. The bolt passes through the glass, so each panel needs a hole at every clamp, drilled before the glass is toughened.

Can it go outside?

Yes, once the frame and tabs are painted or powder coated after welding. The light zinc coating alone is for protection in store, not outdoor exposure.

Can I bolt it on instead of welding?

It is made to be welded. For a bolt-on fixing to a post, use one of our glass clamps instead.

Ordering and delivery

Order 6 or more online with Express UK Delivery and same-day dispatch on orders before 2pm, Monday to Friday. For a full balustrade, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will check quantities and delivery before you order.

Our products have been used by

Logos are for illustrative purposes only and do not imply official endorsement

About Us

Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Klarna Maestro Mastercard Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Double Weld-On Glass Clamp, 160 x 40 x 6mm Mild Steel Strap with Two 40mm Discs, 8-12mm Glass

£14.90 Inc. Vat

You may also like

Recently viewed