-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
A ready-made lock stile kit for building a steel pedestrian gate from 40mm box section: a 2100mm length of 40 x 40 x 2mm mild steel box section with the slots already cut for a concealed lock, supplied with the lock, lever handles, a Euro cylinder with three keys and escutcheons. Weld the box section in as the closing stile of the gate, finish the gate, then drop the lock into the pre-cut slots. The lock sits hidden inside the stile with only the faceplate, handles and keyhole showing. It saves the most fiddly part of making a gate: marking out and cutting accurate lock slots in box section. The price shown is for one complete kit. The keep for the post is sold separately.
Specifications
| What you get | Box section with pre-cut lock slots, concealed lock, strike plate, lever handles, Euro cylinder with 3 keys and escutcheons |
|---|---|
| Box section | 40 x 40mm square, 2mm wall, 2100mm long |
| Box section material | Mild steel, raw finish |
| Lock | Nickel coated concealed lock, fitted inside the stile, with a reversible latch |
| Faceplate | About 238 x 22mm |
| Lock case | 36mm deep, 21mm backset |
| Handle to cylinder centres | About 76mm |
| Latch and bolt | Latch projects about 13mm, bolt about 16mm |
| Strike plate | About 190mm long, 22mm wide, 32mm at the lip |
| Cylinder | Euro profile, 3 keys |
| Weight | About 5.1 kg |
| Not included | The keep for the post |
Why use this kit
No slot cutting. The openings for the lock, handle spindle and cylinder are already cut in the box section. Marking those out and cutting them cleanly in a 40mm section is slow, and a slot in the wrong place can scrap the stile.
A neat, concealed lock. With the lock inside the stile, there is no lock box on the face of the gate, just the handles, the keyhole and a slim faceplate on the edge. It looks tidy and leaves nothing on the face to lever off.
Everything for the locking side in one order. The lock, handles, cylinder, keys, escutcheons and the stile itself arrive together, so there is no matching of backsets or spindle sizes between suppliers.
Length to work with. At 2100mm the section is long enough for a full-height pedestrian gate, and you can cut it down to the height you need. Check the lock slots stay where you want the handle before you cut.
Reversible latch. The latch can be turned round to suit a left-hand or right-hand gate, so one kit covers either hang.
Where it is used
- Steel pedestrian gates for homes, side passages and rear access
- Gates into yards, compounds and bin stores
- School, commercial and site boundary gates
- Any gate a fabricator or blacksmith makes from 40mm box section
Choosing the right option
| You want | Choose |
|---|---|
| Making a new gate from 40mm box section, concealed lock | This kit |
| The same kit for 50mm box section | Gate lock frame kit, 50mm box section |
| The keep for the post on this kit | Black steel gate lock keep, 240 x 41mm |
| A pre-cut keep length for the post | Pre-cut keep box, 40mm, 2000mm long |
| A heavier insert lock kit with two pre-cut 2m profiles | Insert lock kit, 40mm box section |
| Insert lock only, you cut the slots | Insert lock, 40mm |
| A gate that is already built | Garden gate lock, 40mm |
All our locks and latches are in gate locks and latches.
Fitting and care
Plan the hang first, then cut the section to height, keeping the slots at the handle height you want. Weld it in as the closing stile with the faceplate slot facing the post, keeping weld heat away from the slots. Paint, powder coat or galvanise the gate, and clear any coating from the slots. Slide in the lock, fit the cylinder, handles and escutcheons, then fix the keep on the post so the latch and bolt engage fully.
Fit the lock after finishing, because heat and galvanising would damage it. Keep the lock clean and put a little graphite in the cylinder once a year.
Frequently asked questions
Is the lock included?
Yes. The kit includes the lock, strike plate, handles, Euro cylinder with three keys, escutcheons and the box section.
Is a keep for the post included?
No. Order the black steel gate lock keep, 240 x 41mm separately, or make your own keep on the post.
What size is the box section?
40 x 40mm square with a 2mm wall, 2100mm long.
Can it be used on a left-hand or right-hand gate?
Yes. The latch is reversible, so it can be set to suit either hang.
Is the steel painted?
No. The box section is raw mild steel, ready to weld and finish with the gate. Fit the lock after finishing.
Can I cut it shorter?
Yes. Cut from whichever end leaves the lock slots at the handle height you want. A 2100mm length suits most pedestrian gates.
Ordering and delivery
Order online for Express UK Delivery, with same-day dispatch on orders placed before 2pm, Monday to Friday. At 2.1m long the box section travels as a long parcel, so please check you have clear access at delivery. For trade quantities or help planning a gate, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm stock and delivery before you order.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
