-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
A galvanised open mesh steel flooring panel, 2000 x 1000mm and 25mm deep. It is made from 25 x 5mm bearing bars at 34mm centres, joined by cross bars at 101.6mm centres, the 34/100 mesh pattern widely used for walkways and platforms. A flat band runs round all four sides, so the bar ends are closed and the panel can be dropped straight in. It suits grating, landing platforms and heavy-duty industrial installations where strength and long life come first. The price shown is for one panel.
Why choose this panel
Open area that drains. Water, grit and spills fall straight through, so a walkway stays clearer than solid plate. Light and air pass through too, which helps around plant and machinery.
Bars on edge. The 25mm deep bearing bars stand on edge, so the panel carries its load through the depth of the steel, not the thin 5mm face.
Fully bound and galvanised. Banded edges and a galvanised finish mean it arrives ready to fix, with no fabrication and no painting.
Fixes without welding. Fix it down to the supporting steel with a galvanised grating clip or a 316 stainless grating clip. Both suit load bar centres from 30mm to 41mm, so they fit this panel's 34mm centres.
A standard module. At 2000 x 1000mm it is a practical size for building up walkways and platforms on a simple supporting frame.
Where it is used
Walkways and access gantries, landings on fire escapes and external stairs, rooftop plant platforms, mezzanine flooring, machinery guards, drainage covers and factory floors. The galvanised finish suits outdoor and damp locations.
Specifications
| What you get | One panel |
|---|---|
| Size | 2000 x 1000mm |
| Depth | 25mm |
| Mesh | 34/100 pattern |
| Bearing bars | 25 x 5mm at 34mm centres |
| Cross bars | At 101.6mm centres |
| Finish | Galvanised |
| Edges | Fully bound |
| Weight | 63.5 kg |
| Load capacity | Not published for this line: call us if you need a figure |
| Delivery | On a pallet, additional charges may apply |
Choosing the right panel
Go galvanised and fully bound if you want a finished panel for outdoor or damp locations. Go raw with open ends if you will cut, band and finish it yourself. Check which way the bearing bars must run: they have to span between your supports.
| Panel | Size | Finish and edges |
|---|---|---|
| 1000 x 1000mm galvanised panel | 1000 x 1000mm | Galvanised, fully bound |
| This panel | 2000 x 1000mm | Galvanised, fully bound |
| 1000 x 1000mm raw steel panel | 1000 x 1000mm | Raw steel, open ends |
| 2000 x 1000mm raw steel panel | 2000 x 1000mm | Raw steel, open ends |
You can also see all stair treads, clips and flooring.
Fitting and care
Lay the panel with the bearing bars spanning between the supports, and make sure each end sits fully on the supporting steel. Fix it down with grating clips so that it cannot lift or shift. Treat any cut or damaged areas with a zinc-rich paint. Lift heavy panels with suitable equipment, and wear gloves, because the bar edges can be sharp.
Load tables are not published for this panel, so have the span and loading confirmed by a competent person before use. Check the fixings at regular intervals and keep the mesh clear of debris.
Frequently asked questions
Is the price for one panel?
Yes, one panel, 2000 x 1000mm.
What load will it take?
A load table is not published for this panel. Have a competent person confirm the span and loading for your use, or call us.
Are clips included?
No. Grating clips are sold separately. Allow enough to hold each panel at its supports.
How is it delivered?
It travels on a pallet because of its weight and size, and additional pallet delivery charges may apply. Call us with your postcode before ordering.
What does 34/100 mean?
It describes the mesh: bearing bars at 34mm centres and cross bars at about 100mm centres, 101.6mm on this panel.
Ordering and delivery
Because of its weight and size this panel travels on a pallet, and additional pallet delivery charges may apply. Please call 01744 520 110 or email sales@industrialsuppliesco.co.uk with your postcode before ordering, and we will confirm the delivered cost, availability and any vehicle access needs. Orders placed before 2pm, Monday to Friday, are dispatched the same day where stock allows.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
