-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
A heavy adjustable wrap-around gate hinge that bolts to the post or wall. A square 120mm zinc plate, 6mm thick, fixes to a pier, post or wall with four bolts. A thick M24 threaded bar runs through it, locked by a nut each side, and ends in a block with a flat steel strap that wraps round a 35mm round hinge pin on the gate. Turn the nuts along the 80mm thread to bring the gate in or out and level it, and lift the gate off by undoing one clamp bolt. In the box: the back plate with M24 bar and nuts, the block, the strap, and the clamp bolt and nut. The price shown is for one complete hinge.
What you get
| Back plate | 120 x 120mm, 6mm thick, 4 holes 11mm at 90mm centres |
|---|---|
| Threaded bar and block | M24 bar with 80mm of adjustment thread and a nut each side of the plate |
| Strap | Flat steel U strap sized for a 35mm round pin |
| Clamp bolt | One bolt and nut through the strap and block |
| Not included | The four post fixings and the 35mm hinge pin on the gate |
Why choose this hinge
No welding at the post. The plate bolts on, so it suits brick and stone piers, concrete posts, timber posts and walls as well as steel posts.
Bigger plate, bigger bar. The 120mm plate and M24 bar are sized for a heavier gate than the M20 hinge on its 100mm plate: 700kg against 500kg.
Adjust after hanging. Two nuts on an 80mm thread let you move the gate in or out and level it, now or years later as the gate settles.
Wrap-around strap. The strap clamps round a 35mm round pin and turns on it, a strong, simple pivot that lets the gate off easily when the clamp bolt is undone.
Where it is used
Heavy steel driveway, yard and farm gates hung on brick, stone, concrete, oak or steel posts, and heavy gates being re-hung where an older hinge has worn out.
Specifications
| Sold as | One hinge |
|---|---|
| Back plate | 120 x 120mm, 6mm thick |
| Fixing holes | 4 x 11mm at 90mm centres |
| Thread | M24, 80mm |
| Overall | 150mm, strap to plate face |
| Strap | For a 35mm round pin, 46mm outside, 65mm long, 40mm high |
| Maximum gate weight | 700kg |
| Material and finish | Steel, bright zinc plated |
| Weight | About 1.54 kg |
Is this the right one?
| You want | Choose |
|---|---|
| To bolt to a post or wall, 35mm pin, 700kg | This hinge |
| To weld a nut to a steel post, 35mm pin, 700kg | M24 wrap-around hinge with nut |
| To pass through a post, 35mm pin, 700kg | M24 wrap-around hinge with jointed plate |
| A lighter gate, bolt-on plate, 30mm pin, 500kg | M20 wrap-around hinge on 100mm plate |
| A pin section to weld into a 40mm box stile for this strap | Weld-in hinge pin block for 40mm box |
Fitting
Use two hinges per gate leaf, one near the top and one near the bottom, with a 35mm round hinge pin fixed to the gate at each height. Mark the plate holes on the post in a vertical line and fix each plate with four M10 bolts, anchors or coach screws to suit the post. Stand the gate on packers, wrap each strap round its pin and fit the clamp bolt. Set the nuts on the bar so the gate hangs level with an even gap, then tighten both nuts hard against the plate and remove the packers.
Care
Grease the pin inside the strap once a year and check the nuts and fixings each spring.
Frequently asked questions
Is the price for one hinge?
Yes, one complete hinge. Most gate leaves need two.
Is the hinge pin included?
No. The strap wraps round a 35mm round pin fixed to the gate, which is bought separately or made up by your fabricator.
What fixings do I need for the plate?
Four M10 bolts, anchors or coach screws suited to your post or wall. The holes are 11mm at 90mm centres. Fixings are not included.
Is it left or right handed?
Neither. It works on either side.
Is the 700kg rating for one hinge or the pair?
Treat 700kg as the most the whole gate should weigh on its hinges, not the load per hinge. Heavy gates also need a firm post and a stop or wheel.
Ordering and delivery
Order online with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For larger quantities call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm stock and delivery before you order.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
