Insert Gate Lock Kit for 40mm Box Section, with 2 x 2m Pre-Cut Profiles, Handles, Keep and Cylinder, Black

A complete insert gate lock kit for 40mm box section gates, supplied with two 2m lengths of box section already cut and drilled to take the lock and keep. The hard measuring and slotting is done for you. Weld the two profiles into your gate and post, slide in the lock, and fit the handles. The price shown is for one complete kit.

What is in the kit

• One insert lock
• Two aluminium cover plates
• One cylinder with keys
• One aluminium handle set
• One stainless steel keep
• Two 2000mm profiled 40 x 40 x 2.5mm box sections, one prepared for the lock and one for the keep

Why choose this kit

The profiling is already done. Cutting a clean slot and accurate holes in box section is the slowest and most error prone part of fitting an insert lock. Here the handle hole, cylinder slot, fixing holes and keep recess are all made for you.

The lock sits inside the frame. An insert lock disappears into the box section, leaving only the handles and slim cover plates on view, which looks far neater than a surface box on a gate.

A matched set. The lock, keep, plates, handles, cylinder and profiles are bought together, so there is no working out which parts suit each other.

Finished in black. The kit is powder coated black RAL 9005, so it suits a black gate straight away.

Where it is used

Pedestrian gates in 40mm box section around commercial premises, schools, housing, plant rooms, bin stores and domestic side gates, wherever a keyed lock needs to be built neatly into the steelwork.

Specifications

Related gate hardware

Fitting the kit

1. Decide which way the gate opens, and set the lock profile into the gate frame and the keep profile into the post or meeting stile.
2. Weld the profiles in place, keeping heat and spatter away from the prepared openings. The box section has a welded seam along one face.
3. Slide the lock into its opening and secure it through the fixing holes.
4. Fit the cylinder, cover plates and handle set.
5. Fit the keep to its recess, then close the gate and adjust until the lock engages cleanly.

We recommend a safety cable on all swing gates. Dimensions are for guidance and components may vary slightly from the sizes shown.

Frequently asked questions

Ordering and delivery

Order online, with Express UK Delivery to your site. Please check that the delivery address can take a 2m length. For a larger job or a mixed order, call 01744 520 110 or email sales@industrialsuppliesco.co.uk.