-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
A 304 stainless wall bracket that carries a 42.4mm round handrail on internal stairs, landings and corridors. It is one rigid part: a 60mm round plate that screws to the wall, a 12mm round bar arm and a curved saddle the rail sits in, holding the rail 78mm from the wall to its centre. With no pivot or loose screws it stays put once fixed. Satin 304 is the grade for indoor and sheltered rails. The price shown is for one bracket, minimum order 5.
What you get
| Sold as | One bracket, minimum order 5 |
|---|---|
| Bracket | Round wall plate, 12mm bent round bar arm and fixed saddle, 304 stainless, satin |
| Saddle | Curved to sit under a 42.4mm round rail, with two screw holes |
| Not included | The handrail, wall fixings and the screws into the rail |
Why choose this bracket
Simple and solid. The saddle is fixed to the arm, so there is nothing to adjust or work loose. On level rails along landings and corridors the saddle lies flat along the rail. On a stair the rail meets the fixed saddle at the stair angle and is held by its two screws; if you want the saddle to lie flat along a pitched rail, use the 304 adjustable bracket for 42.4mm rail.
Room for a full grip. The arm comes up from below the rail, so a hand can slide the whole length without hitting the bracket, and the 78mm stand-off leaves space for knuckles between the rail and the wall.
The right grade for indoors. 304 stainless keeps its satin finish in schools, offices, care homes and flats. For outdoor rails, especially by the sea or a pool, choose the 316 bracket for 42.4mm rail, which resists salt and chlorine far better.
Specifications
| Material | 304 stainless steel, satin finish |
|---|---|
| Fits | 42.4mm round handrail |
| Wall plate | 60mm round, 5mm thick, three 5mm holes on a 42mm circle |
| Arm | 12mm round bar, bent through 90 degrees |
| Wall to rail centre | 78mm |
| Plate centre to top of saddle | 70mm |
| Saddle | 62 x 25mm, 4mm thick, curved, two 6mm holes at 42mm centres |
| Weight | About 0.26 kg |
Is this the right bracket?
| Your situation | Choose |
|---|---|
| 42.4mm rail, indoors | This 304 bracket |
| 42.4mm rail, outdoors or by the sea | 316 bracket 42.4mm |
| 48.3mm rail, indoors | 304 bracket 48.3mm |
| 48.3mm rail, outdoors | 316 bracket 48.3mm |
| A saddle that tilts to the stair pitch | 304 adjustable bracket 42.4mm |
| A timber or square rail with a flat underside | 304 bracket with flat saddle |
Fitting
Brackets are usually spaced no more than about 1 metre apart, with one close to each end of the rail; follow your designer where the rail must take guarding loads. Mark the line of the rail on the wall at the height you need. The top of the saddle is 70mm above the centre of the plate and the rail centre about 91mm above it, so set the plates that far below the rail line. Fix each plate with three screws and plugs or anchors to suit the wall, lay the rail on the saddles, and fix it to each saddle with two short screws from below into pre-drilled holes.
Care
Wipe along the grain with warm soapy water and a soft cloth, then dry. Avoid chlorine bleach, wire wool and scouring pads, and use stainless screws so they do not leave rust marks on the bracket.
Frequently asked questions
Is the price for one bracket?
Yes, one bracket. The minimum order is 5, which covers a rail of about 4 metres.
How many brackets do I need?
Allow one about every metre plus one near each end. A 3 metre rail usually takes 4.
Are screws included?
No. Choose wall fixings to suit the wall, and use short stainless screws through the saddle into the rail.
Will it fit a 48.3mm rail?
No, the saddle is curved for 42.4mm. Use the 304 bracket for 48.3mm rail.
Can I use it outside?
304 is fine under cover and away from salt and chlorine. For open outdoor rails, coastal sites and pools, the 316 version keeps its finish far better.
Ordering and delivery
Order online in any quantity from 5, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a full handrail with tube, bends and end caps, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm the parts and delivery before you order.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Minimum order 5 pcs