Black Key Clamp Double Lugged Bracket for 26.9mm Tube, Panel Joining and Fixing, Indoor, Size A

A black bracket that clamps onto 26.9mm tube and gives you a flat lug on each side, so you can bolt a panel across the tube or join two panels on it. The round barrel slides over the tube and locks with one hex socket grub screw, so you can set it at any height and turn it to face any way. A flat plate runs across the barrel with a 10mm hole in each end, 81mm apart, and it sits almost flush with the face of the tube, so the panels lie close against the frame. The black electrophoretic finish suits black tube frames for shop displays, office partitions and workshop fit-outs indoors. The price shown is for one bracket, with a minimum order of 10.

Why fitters use it

Fix panels without drilling the tube. The bracket clamps on, so the tube stays whole and the bracket can be moved or added later.

Two fixing points in one fitting. Bolt one wide panel through both lugs for a firm hold, or butt two panels together on the tube with one lug each.

Panels sit tight to the frame. The plate lies almost in line with the face of the tube, so boards, mesh and signs fit close with no wide gap.

Black to match black frames. It matches black key clamp tube and fittings, for a clean industrial look in shops, cafés, offices and studios.

Set at any height. Slide it along the tube, turn it to suit and lock it with the grub screw.

Where it is used

Joining panels on the posts of room dividers and display walls, fixing back panels to shop display frames, screening boards to office and studio partitions, pegboard and tool boards to workshop frames, signs and menu boards to tube frames, and mesh or acrylic panels to indoor guarding.

Specifications

How many do you need?

Choosing the right bracket

This bracket takes 26.9mm tube. Where a panel only needs fixing on one side, such as at the end of a run, use the black single lugged bracket for 26.9mm tube. For 33.7mm tube there is a black double lugged bracket and a black single lugged bracket. For outdoor work, use the galvanised range, such as the galvanised double lugged bracket for 42.4mm tube.

Building the frame? See the matching black 90° elbow, oval base flange and end cap for 26.9mm tube.

Fitting and care

Slide the bracket onto the tube, turn the plate to face the panels and tighten the grub screw with a hex key. Hold the panel or panels in place, mark through the lug holes, drill and fix with an M8 or M10 bolt, washer and nut, or a screw to suit the board. Fit at least two brackets on each tube so the panels are held at top and bottom. Wipe clean with a damp cloth and touch up chips with black paint. The electrophoretic coat is for indoor use only.

Frequently asked questions

Ordering and delivery

Order 10 or more online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a full fit-out or mixed fittings, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.