-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
A new motor for a underground gate. This is the 230V motor for the underground operator. It swaps straight into the existing foundation box to renew an ageing system or replace a failed motor, without digging out the box. It is rated at 400W and 320Nm with IP67 protection. The price shown is for one motor. Check it matches your existing unit before you order, or call 01744 520 110 and we will confirm the fit.
Why choose it
Direct swap. Fits the existing underground foundation box.
Strong drive. Steel worm screw and bronze crown wheel; 320Nm.
Sealed. IP67 for use below ground.
Self-locking. Irreversible motor holds the gate against its stops.
Where it is used
Existing underground installations on driveway and estate gates.
Specifications
| What you get | 1 x motor, 230V |
|---|---|
| Fits | Foundation box |
| Power supply | 230V 50/60Hz |
| Max power | 400W |
| Max torque | 320Nm |
| Max opening | 107 degrees |
| Protection | IP67 |
| Weight | 14.5kg |
Installation and safety
Powered gates must be installed by a competent installer, with the mains supply wired by a qualified electrician, and the finished gate should be risk assessed and force tested to BS EN 12453.
Related gate automation
See the whole range in Gate Automation.
Fitting
Isolate the power, release and remove the old motor from the foundation box, fit the new one and reconnect it, then reset the stops and working times. Mains wiring by a qualified electrician.
Care
Keep the box drain clear and the cover free of grit; service yearly.
Frequently asked questions
Will it fit my box?
Yes, if you have a foundation box.
Is it one motor?
Yes, one motor; order two for a pair of gates.
Do I need a new control unit?
Not normally; it connects to the existing control unit.
Ordering and delivery
Order online with Express UK Delivery. Not sure which kit suits your gate? Send us the leaf width, weight, post size and a photo: call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will recommend the right kit and accessories.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
