-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
Turns a plain box section post into a decorative one. This cast collar is 70mm tall and 70 x 70mm at its widest: a flat square band in the middle, deep shaped waists above and below, a 62mm band near each end and a 55mm lip at the top. A 42mm square hole slides over 40 x 40mm square box section, so it wraps round gate posts and fence posts as a bold band of detail. The price shown is for one collar, with a minimum order of 5.
Why choose this collar
Dresses up box section. Plain 40mm box posts look utilitarian; one or two collars give them the look of a cast post.
Sized for 40 x 40mm. The 42mm square hole slides over 40 x 40mm box section with a little clearance and cannot turn once it is on.
Solid casting. At about 0.68 kg it has real weight and sits square on the post.
Ready to paint. It comes in a raw cast finish and takes the same primer and paint as the rest of the ironwork.
Where it is used
Gate posts, fence and railing posts, pergola and carport legs, and newel posts made in 40 x 40mm square box section, usually one near the top and one lower down.
Specifications
| What you get | One collar, minimum order 5 |
|---|---|
| Material | Cast metal |
| Finish | Raw, unpainted |
| Height | 70mm |
| Widest point | 70 x 70mm square |
| End bands and top lip | 62mm and 55mm |
| Hole | 42mm square |
| Suits | 40 x 40mm square box section |
| Weight | 0.68 kg each |
| Fixing | Slide on, then tack weld, bond or pin |
How many do you need?
Allow one or two per post. A pair of gate posts dressed top and bottom takes 4.
Is this the right collar?
| You want | Choose |
|---|---|
| A collar for 40 x 40mm box section | This collar |
| A collar for 50 x 50mm box section | Box section collar for 50 x 50mm |
| A collar for 60 x 60mm box section | Box section collar for 60 x 60mm |
| A collar for 80 x 80mm box section | Box section collar for 80 x 80mm |
| A flat cover plate for 40 x 40mm box section | Collar cover plate for 40 x 40mm |
Fitting and care
Slide the collar down over the top of the post before the post cap, finial or top rail goes on. Set it at the height you want, then hold it with a small tack weld at the top and bottom edge, a metal adhesive, or a self-tapping screw through the band into the post.
Wire brush and degrease, then prime with a metal primer and paint to match the rest of the ironwork. We do not recommend hot-dip galvanising for this collar, as cast parts can blister or crack in the zinc bath. Use a zinc-rich primer instead outdoors.
Frequently asked questions
Is the price for one collar?
Yes, it is for one collar, with a minimum order of 5. For a larger job, call us for a quantity price.
Can I fit it to a post that is already in the ground?
Yes, as long as the top of the post is free. Slide it down from the top before fitting the cap or finial.
Will it fit 40mm round tube?
It will slide on but will sit loose. It is made for square box section.
Can it be galvanised?
We do not recommend hot-dip galvanising for this part. Prime and paint it, or use a zinc-rich primer before your top coat.
Ordering and delivery
Order 5 or more online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Minimum order 5 pcs