-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
Forklifts clip door frames, delivery vans reverse into building corners, and cars mount kerbs that were never meant to be driven on. A yellow steel bollard is the simplest way to stop that happening. This fixed post stands 1000mm above ground, is made from galvanised steel tube with a yellow finish and a welded steel cap, and comes in eleven diameters from a slim 60mm up to a heavy 219mm. Choose a flanged base plate for bolting down onto an existing concrete slab, or an extended ragged leg for casting 400mm into a new concrete foundation.
Why it works
Seen before it is hit
Yellow reads clearly against grey concrete, brick and cladding, in daylight and under warehouse lighting. Drivers and forklift operators pick the post up early, so it guides traffic as much as it stops it.
Galvanised under the colour
The tube is galvanised steel with a yellow finish over it. If the colour is scuffed by a bumper or pallet, the galvanised layer underneath still protects the steel, which matters on external sites that stay wet for months.
Wall thickness that steps up with size
Diameters from 60mm to 127mm, and 152mm, are 3mm wall tube. The 139mm, 168mm, 193mm and 219mm posts move up to 5mm wall, which is why they weigh noticeably more. Weights run from about 6kg for the 60mm post to 39kg for the 219mm bolt-down version.
- 1000mm above ground on every diameter
- Galvanised steel tube, yellow finish, welded steel cap
- Bolt-down flange plate or 400mm cast-in leg with welded fixing spikes
Where it's used
Either side of roller shutter doors and loading bay openings. On the exposed corners of warehouses, factories and retail units. Along pedestrian walkways in car parks, supermarket service yards and industrial estates, and at the edge of pedestrianised precincts and school frontages, where a line of posts also acts as a deterrent to ram-raiders. Inside buildings, slimmer sizes protect racking ends, fire doors, plant and electrical cabinets from forklift and pallet truck strikes.
Specifications
| Height above ground | 1000mm |
| Diameters | 60, 76, 90, 101, 114, 127, 139, 152, 168, 193 and 219mm |
| Material and finish | Galvanised steel tube, yellow finish |
| Cap | Welded steel cap |
| Wall thickness | 3mm (60–127mm and 152mm); 5mm (139mm, 168mm, 193mm, 219mm) |
| Bolt-down base plate | 60–114mm: 3-hole round plate, 133mm x 5mm. 127–193mm: 4-hole square plate, 250mm x 10mm. 219mm: 4-hole square plate, 400mm x 10mm |
| Cast-in depth | 400mm below ground, with welded fixing spikes |
| Weight, bolt down | 6, 7, 9, 10, 12, 13, 23, 15, 25, 28, 39kg (60mm to 219mm in order) |
| Weight, cast in | 6, 7, 9, 10, 12, 13, 23, 15, 28, 33, 37kg (60mm to 219mm in order) |
| Fixing bolts and anchors | Not supplied; size not published for this line |
| Impact rating | Not published for this line |
| Guarantee | 12 months from the manufacturer, when installed and used correctly |
Choosing the right option
Bolt down or cast in? Bolt down when there is already a sound concrete slab and you want to fit the post without breaking out the surface. It also makes a damaged post easier to swap. Cast in when you are laying new concrete or block paving, want a clean finish with no plate to trip on, or the slab is too thin or poor to take anchors. A cast-in post with its 400mm leg in concrete is generally the stronger installation.
Which diameter? As a rule of thumb, 60mm to 90mm suits pedestrian guidance, marking out and light internal protection. 101mm to 127mm covers most car park, kerb-line and building-corner work. Where forklifts, vans or HGVs are the risk, such as loading bays, shutter door frames and yard corners, go for 139mm or larger. The 139mm, 168mm, 193mm and 219mm posts use the thicker 5mm wall. Larger bolt-down sizes also have a bigger base plate, so allow for its footprint.
Installation, use and care
Bolt-down posts must go onto a suitable, sound concrete surface using anchors chosen for the slab and the expected loads. Fixings are not included. For cast-in posts, excavate a hole for the 400mm leg plus a concrete surround, set the post plumb, and leave the concrete to cure before the post takes any load. Check underground services before digging or drilling. Touch up scuffs to the finish as part of routine site checks.
FAQ
Are fixings included with the bolt-down version?
No. Choose anchors that suit your slab thickness and concrete quality. The 60mm to 114mm posts have a 3-hole plate and the larger sizes a 4-hole plate. The bolt size is not published for this line.
How deep does the cast-in version go?
The leg extends 400mm below ground, so the post still stands 1000mm above finished ground level. Welded fixing spikes near the bottom of the leg lock it into the concrete.
Can I use it indoors?
Yes. The bolt-down version is widely used inside warehouses and factories to protect racking ends, doors and plant.
Is it crash rated?
No impact or crash rating is published for this line. It is a protective and guidance bollard, not a certified anti-terrorism or hostile vehicle mitigation product.
Ordering and delivery
Choose the fixing type and diameter above and order online. For quantities, mixed sizes, lead times or delivery to site, call us on 01744 520110 or email sales@industrialsuppliesco.co.uk with your postcode and we will confirm the details.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.




