-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
If you need somewhere to sit along a wall but have no floor space to give up, this backless wall-mounted bench is the practical answer. It is an all-steel seat of five rectangular box-section slats carried on two curved cantilever brackets that bolt flat to the wall, so nothing touches the ground. That keeps footways, platforms and shelter floors clear for sweeping and wheelchairs. It suits a short rest on the way through rather than a long sit: bus and waiting shelters, covered walkways, school playground walls, stations and busy town-centre streets. It comes in 1000mm or 1800mm lengths, in galvanised steel, galvanised with a RAL powder coat, or grade 304 stainless steel.
Why it works
Off the ground, out of the way
With no legs, nothing sits in standing water or gets in the way, and the paving underneath stays open for cleaning and drainage. Each bracket pairs a tall, tapered back plate with a sweeping curved gusset under the seat.
A seat that sheds water
The five box-section slats are spaced apart, so rain runs straight through instead of pooling. On galvanised and powder-coated benches, plastic end caps close off the ends of the slats.
Finishes for the setting
Galvanised steel is the hard-wearing, low-maintenance choice for most sites; add a RAL powder coat to match a colour scheme; or choose brushed grade 304 stainless for a bright civic finish.
- Wall-mounted: no legs, clear floor beneath
- Five box-section steel slats on two curved brackets
- 1000mm or 1800mm long, supplied fully welded
- Galvanised, galvanised + RAL powder coat, or grade 304 stainless
Where it's used
You will see it on the back walls of bus and waiting shelters, along covered walkways and canopies, on station platforms, outside school buildings and sports pavilions, on market squares and at building entrances. It gives people somewhere to sit briefly without blocking the route.
Specifications
| Lengths | 1000mm or 1800mm |
|---|---|
| Width x height (bench unit) | 350mm x 390mm (product page quotes width as 344mm) |
| Seat height | 466mm quoted by the manufacturer; final height depends on where the brackets are fixed |
| Seat | Five rectangular box-section steel slats |
| Brackets | Two curved cantilever wall brackets, 5mm thick fixing plate (flange plate quoted as 500 x 75 x 5mm) |
| Wall fixings | Datasheet: 6 x 10mm bolts per bench; product page: 8 x 12mm bolts. Bolts not listed as included |
| Finishes | Galvanised; galvanised + RAL powder coat (Jet Black 9005, Colza Yellow 1021, Pure White 9010, Traffic Blue 5017, Moss Green 6005, Traffic Red 3020, Silver Grey 7001); brushed stainless steel grade 304 |
| End caps | Plastic end caps on galvanised and galvanised + coated benches |
| Weight | 18kg (1000mm), 28kg (1800mm) |
| Number of users | Not published for this line |
| Supply | Fully welded, ready to fix |
| Guarantee | 12 months, if installed and used correctly |
| Origin | UK made |
Choosing the right option
Length: the 1000mm bench fits narrow shelter bays, piers between doors and short wall runs. The 1800mm bench gives a longer seat for busier stops and walkways. The manufacturer does not publish a user count, so measure the clear wall length first, including room either side for the brackets and for people getting up.
Finish: plain galvanised is the economical, long-life choice where appearance is secondary. Choose a RAL colour to match shelters, railings or a school or corporate scheme. Yellow or white also help the bench stand out against a dark wall. Stainless steel suits high-profile frontages and anywhere you want a bright metal finish without paint.
Wall: the bench is only as secure as the wall it is fixed to, so check the wall before you choose a location.
Installation, use & care
The bench arrives fully welded, so on site you only need to fix the two brackets to the wall. The datasheet does not specify the wall construction or anchor type. Your installer should choose anchors suited to the wall (solid masonry, concrete or a structural frame) and confirm the bolt schedule with us before fixing. Wash galvanised, painted and stainless surfaces with mild detergent and water, and avoid abrasive cleaners on powder coat.
FAQ
Does it need any floor fixing?
No. It is supported entirely by its two wall brackets, with nothing touching the ground.
Are the wall bolts supplied?
Fixing bolts are not listed as included. The current datasheet specifies 6 x 10mm bolts per bench, and the manufacturer's product page states 8 x 12mm. We confirm the exact schedule when you order, so your installer can supply anchors to suit the wall.
Can I have a RAL colour that is not listed?
The listed colours are the ones we price here. The manufacturer can powder coat galvanised benches in other RAL colours to order. Call or email with the RAL code for a quote.
Does the stainless version have end caps?
The datasheet lists plastic end caps for the galvanised and galvanised and coated finishes. It does not mention end caps for the stainless bench. Ask us if this matters for your project.
Ordering & delivery
Order online, or contact us for multiple benches, project pricing or other colours. Call 01744 520110 or email sales@industrialsuppliesco.co.uk. Powder-coated benches are made to order in your chosen colour and cannot be returned, so please double-check the RAL code before you order.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.










