Google Top Quality Store — Verified Exceptional Shopping Experience

Wall-Mounted Bench – Backless Steel Slatted Seat with Angled Front Slat & Arched Brackets, 1000mm or 1800mm, Galvanised, RAL Colour or Stainless


Price:
Sale price£559.90
Inc. Vat

Express UK Delivery (2 Working Days)

Length: 1000mm
Finish: Galvanised

In stock, ready to ship

Trusted by Industry Professionals

Description

If you need somewhere for people to perch for a few minutes without blocking a footway, a bench fixed straight to the wall is often the neatest answer. This backless steel bench bolts to a wall on two arched brackets, so the ground underneath stays clear for sweeping, gritting and leaf blowing. The seat is four flat box-section steel slats with a fifth front slat angled downward, which takes the hard edge away from the backs of the knees. Choose a 1000mm or 1800mm length in hot-dip galvanised steel, galvanised with one of seven powder-coat RAL colours, or brushed grade 304 stainless steel. It suits bus and waiting shelters, canopies, school playgrounds and building frontages where space is tight.

Why it works

Nothing touching the ground

Because the whole bench hangs from the wall, there are no legs to trip over, rot or rust at the base, and no footings to cut into existing paving. Cleaning crews can run a brush or a machine straight under the seat, and standing water and leaves have nowhere to collect around feet.

All-steel and supplied welded

The frame and slats are steel throughout and the bench arrives fully welded, so on site you are only drilling and fixing the two brackets. Each bracket has a 5mm thick fixing plate against the wall and a sweeping arched arm under the seat that carries the slats out to 340mm. On galvanised and colour-coated benches the open slat ends are closed with plastic end caps, which keeps water and debris out of the box sections.

Built for a short sit

This is a perch-and-wait seat rather than a lounging bench: there is no backrest, and the angled front slat lets people sit down and stand up quickly. That makes it a good fit for places where you want seating but not people settling in for an hour.

  • Wall-mounted, backless, ground left clear
  • Four flat slats plus an angled front slat
  • Two arched brackets with 5mm fixing plates
  • Galvanised, galvanised + RAL colour, or grade 304 stainless

Where it's used

Typical sites include bus shelters and waiting areas, covered walkways and canopies, railway and coach station concourses, school playground walls, park pavilions, building entrances, retail parks and market places. Anywhere a freestanding bench would narrow a busy pavement or get in the way of cleaning, a wall-mounted seat keeps the route open while still giving people a place to rest.

Specifications

Product Wall-mounted backless steel bench
Lengths 1000mm or 1800mm
Width (wall to front) 340mm
Overall height (bracket top to bottom) 390mm
Seat height above ground Set by your fixing height on site (not published as a fixed figure)
Seat Four flat box-section steel slats plus one angled front slat
Brackets Two arched wall brackets, 5mm thick fixing plate
Wall fixings 6 x 10mm bolts per bench (not listed as included)
Weight 1000mm: 18kg · 1800mm: 28kg
Material Galvanised mild steel, or stainless steel grade 304
Finishes Galvanised; galvanised + powder coat in Jet Black RAL 9005, Colza Yellow RAL 1021, Pure White RAL 9010, Traffic Blue RAL 5017, Moss Green RAL 6005, Traffic Red RAL 3020 or Silver Grey RAL 7001; brushed stainless steel
End caps Plastic end caps on galvanised and colour-coated finishes
Construction All-steel, supplied fully welded
Seating capacity / load rating Not published for this line
Guarantee 12 months, if installed and used correctly
Country of manufacture United Kingdom

Choosing the right option

Length. The 1000mm bench is the choice for a narrow shelter back wall, a gap between doors or windows, or a short run beside an entrance. The 1800mm bench gives a longer seat for busier stops and playground walls at 28kg against 18kg, so check your wall can take the extra weight.

Finish. Plain galvanised is the hard-wearing, low-maintenance default and blends with galvanised shelters and railings. Galvanised plus powder coat keeps that zinc protection underneath and adds colour: black or silver grey for a discreet frontage, yellow, blue or red for high visibility in playgrounds, green for parks, white for seafront and contemporary schemes. Brushed grade 304 stainless steel suits premium entrances and station concourses where the bench is part of the architecture. Coloured finishes are made to order, so confirm your RAL choice before ordering as coated benches are non-returnable.

Installation, use & care

The bench is delivered fully welded; installation is a case of marking out the two brackets, drilling and bolting through the fixing plates with six 10mm bolts. The manufacturer does not publish a wall construction or anchor type, so choose fixings rated for your substrate and the expected loads, and have the wall checked if you are unsure of its condition. Fix the bench at a seat height that suits your users. Wash down with water and a mild detergent; touch up any chips in coated finishes promptly.

Frequently asked questions

Are the wall fixings supplied?

The specification states that each bench needs six 10mm bolts but does not list them as included. Plan to supply anchors that suit your wall type, whether brick, block or concrete.

What height should it be fixed at?

The bench itself is 390mm from bracket top to bottom, and the seat height depends on where you fix it. No recommended seat height is published for this line, so set it to suit the people using the space.

Does the stainless version have end caps?

End caps are specified for the galvanised and galvanised-plus-colour finishes. The stainless bench is shown with the slat ends closed in stainless steel. Call us if you need this confirmed for a specific scheme.

How many people does it seat?

A seating capacity and load rating are not published for this line. As a rough guide, measure the length you need per person on site and choose the 1000mm or 1800mm bench to suit.

Ordering & delivery

Choose the length and finish above and add to basket. Each bench is supplied fully welded and ready to fix. For quantities, project pricing, lead times or help choosing a colour, call 01744 520110 or email sales@industrialsuppliesco.co.uk.

Our products have been used by

Logos are for illustrative purposes only and do not imply official endorsement

About Us

Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Klarna Maestro Mastercard Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Wall-Mounted Bench – Backless Steel Slatted Seat with Angled Front Slat & Arched Brackets, 1000mm or 1800mm, Galvanised, RAL Colour or Stainless

1000mm / Galvanised

£559.90 Inc. Vat

You may also like

Recently viewed