Transparent Red PVC Strip Roll 50m | See-Through Red Strip Curtain PVC for Warning Strips and Colourful Curtains | 200mm or 300mm Wide

A 50 metre roll of transparent red PVC strip for warning strips in clear curtains and for bold, see-through red strip curtains. Red strips at the edges of a forklift door frame the opening and catch the eye, while staying see-through so they never create a blind spot. A whole curtain in transparent red gives bars, venues, shops and creative workspaces a striking look while still cutting draughts and noise. Cut strips to your own drops for a new curtain or to swap into an existing clear one. Two sizes, 200mm x 2mm and 300mm x 3mm, each priced in full inc VAT.

Why transparent red PVC

Warning strips that stay see-through. Two or three red strips at each edge of a vehicle door show drivers and pedestrians exactly where the opening ends, without blocking the view like solid colour would.

A bold, colourful curtain. In taprooms, bars, venues, shops and studios a red curtain becomes a feature rather than just a door covering, and the view through stays clear.

Colour-coded zones. Red curtains can mark restricted or high-risk areas apart from the rest of a site.

A working curtain too. Like clear PVC, the strips cut draughts, dust and noise and help keep heated or cooled areas at temperature.

Where it is used

Warehouse and factory doors as edge warning strips, bars, breweries and venues, retail back-of-house doors, creative and leisure spaces, and colour-coded zones on industrial sites.

Choosing your size

Match the width and thickness of your existing clear strips if you are adding red warning strips. Transparent red suits pedestrians, trolleys and pump trucks; heavy forklift lanes are better in thicker clear or ribbed PVC with red at the edges. Maximum heights for this line are not published.

How far does a roll go?

Strips needed = opening width divided by (strip width minus overlap), rounded up, plus one. For warning strips you only need two or three at each edge: on a 4m high door, four red strips use 16m, so one roll fits out three doors.

Which product do you need?

Specifications

Cutting and fitting

Unroll the PVC on a clean flat surface and let it relax overnight in a warm room. Cut each strip square with a sharp knife against a steel straight edge, punch or drill the hanging holes to suit your plates or rail, hang with the overlap you need and trim the foot so it clears the floor. Wash with warm soapy water; avoid solvent cleaners.

Frequently asked questions

Ordering and delivery

Choose your size, add to basket and check out online with Express UK Delivery. For several rolls or trade quantities, call 01744 520 110 or email sales@industrialsuppliesco.co.uk.