Swivel Gate Caster with Spring and Bracket, Small, 75mm Wheel, 100kg Limit

A sprung caster that holds up the free end of a swing gate and turns to follow it. When a swing gate is long or heavy, the free end drops and the hinges take the strain. This caster supports that end on a 75mm wheel, and the wheel swivels on its head, so it can follow the arc of the gate rather than fighting it. A coil spring around the rod takes up small differences in ground level. The small model has a maximum weight limit of 100kg. The wheel is 25mm wide, and the open square bracket fixes to the gate upright. The price shown is for one caster. The minimum order is 4.

Why a sprung swivel caster works

The swivel follows the swing. A swing gate moves in an arc, and a wheel that can turn stays pointed along that arc as the gate moves.

The spring keeps it on the ground. As the gate crosses small rises and dips the spring extends and compresses, so the wheel keeps its contact instead of lifting clear or digging in.

A light, neat fitting. At 95mm deep, the small bracket fits a slim upright and is unobtrusive on a light gate.

Where it is used

Swing gates at trade premises, business courtyards, garden centres, agricultural merchants and estates. It is best on smooth surfaces such as block paving or concrete. Soft ground will let any wheel sink, so give it a firm strip to run on.

Specifications

Choosing the right caster

This is the smallest of the three casters, with a 75mm wheel and a 100kg limit. It is meant for light gates, and the 3mm bracket is the lightest of the range. If your gate is close to 100kg, or runs over a rougher surface, go up to the 100mm model. Measure your gate upright against the bracket width before you order, and choose by the gate's weight and the surface it runs on. A jockey wheel in a fixed fork is the alternative if you want a heavier welded fork.

See the full range of gate wheels.

Fitting and care

Hang and adjust the gate first, then position the bracket on the free end of the gate so the wheel sits on the ground with some of the spring compressed. Mark the fixing holes, then fit the bracket with bolts to suit your gate. Fixings are not published as included. Swing the gate through its full travel and check that the wheel swivels freely and stays in contact with the ground.

Check the axle and swivel at each service and keep the rod free of grit, as a seized swivel is what stops a caster following the gate. Replace the wheel if it has flats or has started to break up.

Frequently asked questions

Ordering and delivery

Order 4 or more online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.