-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
For a school playground, park café terrace, country park picnic area or staff break-out space, you need a picnic table that stays put and does not need sanding and staining every spring. This all-steel picnic table pairs a nine-slat table top with two fixed five-slat bench seats on welded round-tube frames, and it bolts straight down to concrete. It comes in two designs: a standard 1.8m table, and a wheelchair accessible version with a 2.4m table top that runs past the end of the seats so a wheelchair user can pull right up to the table. Choose plain hot-dip galvanised, galvanised and powder coated in one of seven RAL colours, or brushed stainless steel grade 304 on the standard table.
Why it works
Slender slats, more of them
The top is made from nine narrow slats and each seat from five, rather than a few wide boards. That gives a clean, open look, lets rain run straight through, and leaves no timber to split or rot.
One welded unit with a low profile footprint
The table, both seats and the frames arrive fully welded, so nothing works loose and nothing can be pulled off. Each end frame is a pair of looped round tubes, one under each seat, with an inner upright carrying the table top, and a low tie bar runs between the two ends. The whole unit is held by just four 12mm bolts into a suitable concrete surface.
Finishes that suit the site
Hot-dip galvanising gives the steel long-lasting corrosion protection. The powder coated versions are galvanised first, so the colour coat sits on top of corrosion protection rather than replacing it. Galvanised and coated tables have plastic end caps on every slat.
- Nine-slat table top, five-slat seats each side
- Standard 1.8m or wheelchair accessible 2.4m table top
- Galvanised, galvanised plus RAL colour, or stainless steel 304 (standard design)
Where it's used
School playgrounds and outdoor dining areas, public parks and play areas, country park picnic sites, business park and factory canteen terraces, hospital and care home gardens. Specify the wheelchair accessible design wherever you need an inclusive picnic spot.
Specifications
| Designs | Standard 1.8m; Wheelchair Accessible 2.4m |
|---|---|
| Table top (L x W x H) | Standard: 1800 x 626 x 739mm; Wheelchair accessible: 2400 x 626 x 739mm |
| Seats (L x W x H) | 1800 x 338 x 454mm (both designs) |
| Overall width | 1302mm |
| Wheelchair space | Table top extends 600mm beyond the seats at one end (wheelchair accessible design, per manufacturer's drawing) |
| Slats | 9 table slats; 5 slats per seat |
| Leg frame centres | 1000mm (per manufacturer's drawing) |
| Seating capacity | Not published for this line |
| Material | Galvanised mild steel, or stainless steel grade 304 (standard design only) |
| Finishes | Galvanised; galvanised + RAL 1021 Colza Yellow, 5017 Traffic Blue, 3020 Traffic Red, 9005 Jet Black, 9010 Pure White, 6005 Moss Green, 7001 Silver Grey; brushed stainless steel (standard only) |
| End caps | Plastic end caps on galvanised and galvanised + coated finishes |
| Fixing | Bolt down only, 4 x 12mm bolts per table (bolts not included) |
| Weight | Standard galvanised / coated: 125kg; Standard stainless: 111kg; Wheelchair accessible: 141kg |
| Guarantee | 12 months if installed and used correctly |
Choosing the right option
Standard 1.8m or wheelchair accessible 2.4m. Both have the same 1800mm seats, the same 739mm table height and the same 1302mm overall width. The accessible version simply has a longer 2400mm top that overhangs the seats by 600mm at one end, leaving clear space under the table for a wheelchair. Allow extra paved length at that end for approach and turning. Where a site has only one table, the accessible design is the inclusive choice.
Finish. Plain galvanised is the hardest-wearing low-maintenance choice and weathers to a dull grey. Choose a RAL colour to match site furniture, school colours or a park palette; coloured tables are made to order and are non-refundable. Brushed stainless steel grade 304 is available on the standard 1.8m design only and suits high-profile civic and corporate spaces.
Installation, use and care
The table arrives fully welded. Position it on a level, sound concrete base and fix through the foot plates with four 12mm anchor bolts (not supplied) chosen to suit your slab. At 111–141kg, plan mechanical handling or enough people for a safe lift. Wash down with water and mild detergent; avoid abrasive pads on coated and stainless finishes.
Frequently asked questions
Can it be used free-standing?
No, it is supplied as bolt down only. Fixing it to concrete stops it being moved, tipped or stolen in unsupervised public spaces. Bolts are not included; use four 12mm anchors to suit your base.
Is the wheelchair accessible version available in stainless steel?
No. The 2.4m wheelchair accessible design is offered in galvanised, or galvanised and powder coated in the seven listed RAL colours. Stainless steel is available on the standard 1.8m design only.
How many people does it seat?
A seating capacity is not published for this line. Each table has two 1800mm seats; on the accessible design, the 600mm table overhang adds a wheelchair place at one end.
Ordering and delivery
Select the design and finish above and order online, or call 01744 520110 or email sales@industrialsuppliesco.co.uk for quantity pricing and lead times. Coloured tables are made to order and cannot be returned. Please tell us about any site access restrictions when you order.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


















