-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
If you are kitting out a school playground, a park, a business park staff area or a country park picnic site, you need a picnic bench that can be bolted down, left outside all year and shrugged off by hundreds of users a week. This all-steel picnic bench pairs an 1800mm table with two 1800mm bench seats on welded U-shaped tubular end frames, with every slat running across the width rather than along it. It is supplied fully welded, so there is nothing to assemble on site, and it is offered in plain galvanised steel, galvanised with a powder-coated RAL colour, or brushed stainless steel grade 304.
Why it works
Cross slats instead of long boards
Most picnic benches use long timber or steel boards running end to end. Here the table top and both seats are made from short, closely spaced steel slats running across the width. Each slat is short and well supported, so it resists the sagging and twisting long boards can suffer under heavy use. Rain drains straight through the gaps, so seats dry quickly after a shower, and there is no timber to split, rot or need re-staining.
A simple, strong frame
Each end frame is a single bent tube: it rises under one seat, sweeps down to ground level, runs across and climbs back up under the opposite seat, with a vertical post from the base of the U up to the centre of the table. A low tie bar links the two frames. Fewer bars than a traditional A-frame means easier sweeping and nothing at knee height.
Finishes for the setting
Galvanised steel gives long-lasting corrosion protection for general use. The galvanised and powder-coated versions add colour on top of that zinc layer, so a chip in the paint does not expose bare steel. Brushed stainless steel grade 304 suits high-profile or coastal-adjacent sites where appearance matters most.
- All-steel frame, table and seats, supplied fully welded
- Cross-slat table top and seats that drain freely
- Bolt-down fixing with 4 x 12mm bolts
- Nine finishes, including seven RAL colours and stainless grade 304
Where it's used
School playgrounds and outdoor dining areas, public parks, country park and visitor centre picnic spots, business park and factory staff break areas, hospital grounds and campuses. Bolting it to a concrete base keeps it in place and deters theft on open, unsupervised sites.
Specifications
| Table top (L x W x H) | 1800 x 589 x 740mm |
|---|---|
| Seats (L x W x H) | Two seats, each 1800 x 399 x 454mm |
| Overall width | 1387mm |
| Construction | Steel frame and slats, supplied fully welded |
| Slat direction | Across the width of table and seats |
| Frame | Two U-shaped round-tube end frames with centre posts to the table, linked by a low tie bar |
| Finishes | Galvanised mild steel; galvanised + powder coat in RAL 1021, 3020, 5017, 6005, 7001, 9005 or 9010; brushed stainless steel grade 304 |
| End caps | Plastic end caps on galvanised and galvanised + coated finishes |
| Fixing | Bolt down only, 4 x 12mm bolts per table (bolts not included) |
| Weight | 101kg galvanised or galvanised + colour; 100kg stainless steel |
| Number of users | Not published for this line |
| Guarantee | 12 months when installed and used correctly |
Choosing the right option
All nine options share the same size, frame and fixing; only the finish changes. Plain galvanised is the most economical choice and the right one for most parks, schools and staff areas. Choose a galvanised + powder-coated RAL colour when you want the bench to match a site colour scheme or stand out: Traffic Red RAL 3020, Colza Yellow RAL 1021, Traffic Blue RAL 5017 and Moss Green RAL 6005 are popular for schools and play areas, while Jet Black RAL 9005, Silver Grey RAL 7001 and Pure White RAL 9010 suit offices and town-centre schemes. Coloured units are made to order, so confirm the RAL code before ordering. Brushed stainless steel grade 304 costs the most but gives the cleanest, most durable surface for prestige frontages and exposed sites.
Installation, use and care
The bench arrives fully welded. Bolt it to a sound concrete surface using four 12mm fixings suited to your base (not included). At around 100kg, plan for two people or lifting equipment. Clean off any concrete splashes after installation and allow concrete to cure fully before the bench is used. For care, wash down with water and a mild detergent; on stainless steel, wipe in the direction of the brushed grain. Check the fixings periodically.
Frequently asked questions
Can this picnic bench be freestanding or concreted in?
No. This design is supplied as bolt down only. It needs four 12mm bolts into a suitable concrete surface, which are not included, so order fixings to suit your base.
How many people does it seat?
A seating capacity is not published for this line. The table and both seats are 1800mm long, so judge capacity against your own site standard.
Will the powder coat chip?
Any powder coat can chip under heavy impact, but the coloured versions are galvanised underneath, so the zinc keeps protecting the steel.
Is the stainless steel version marine grade?
No. It is stainless steel grade 304, which performs well in most outdoor settings. Grade 316 is not offered on this design.
Ordering and delivery
Each bench is made to order and delivered fully welded, ready to bolt down. Coloured units are non-refundable, so please confirm your RAL colour carefully. For multiple-unit orders, schools, councils, delivery lead times or a site quotation, call our team on 01744 520110 or email sales@industrialsuppliesco.co.uk.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.










