-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
A forklift mast or a reversing van does not need much speed to crack the concrete cover on a building column or buckle the flange of a steel stanchion. This steel column protector puts 60mm round steel tube between the vehicle and the column. It wraps the front and both sides of the column base in a U shape, with two rails at 800mm overall height and three legs fixed to the floor. It suits warehouse, logistics, car park and factory managers who need columns up to 580mm wide protected on the sides that traffic actually hits, while the back of the column stays open against a wall, racking run or kerb.
Why it works
A three-sided wrap where impacts happen
Most column strikes come from the aisle side and from vehicles cutting a corner, so the frame guards the front face and both side faces. The open back means you can fit it to a column that sits against a wall or the end of a racking run without needing clear floor all the way round.
Two rails, three legs
The top rail at 800mm catches bodywork and forks at mast height, and the second rail lower down catches pallet corners and bumpers. A centre leg in the middle of the front sits between the two end legs, so a hit on the face of the guard is not taken by two corner legs alone.
Galvanised steel inside and out
The tube is mild steel, galvanised for long life and suitable for internal and external use. The yellow version is galvanised and powder coated with five 100mm black reflective bands, so it shows up in headlights and under poor warehouse lighting.
Where it's used
Steel and concrete building columns in warehouse aisles and at the end of pick faces, canopy columns at loading bays, pillars in multi-storey and undercroft car parks, and structural columns beside forklift routes in factories and distribution centres.
Specifications
| Shape | Three-sided U wrap, two rails, three legs |
|---|---|
| Overall height | 800mm |
| External width | 700mm |
| Internal width (max column width) | 580mm |
| Overall depth (plan) | 676mm (from drawing) |
| Tube | 60mm diameter; wall thickness not published for this line |
| Material | Mild steel, galvanised |
| Finishes | Galvanised; galvanised and powder coated in a RAL colour of your choice; galvanised and coated yellow with 5 x 100mm black reflective bands |
| Fixing | Concrete in (300mm below ground, welded fixing spikes) or bolt down (base plate on each leg) |
| Bolts for bolt down | 9 per unit; supplied only with the "with fixing bolts" option |
| Weight | 28kg concrete in / 25kg bolt down |
| Use | Internal and external |
| Guarantee | 12 months if installed and used correctly |
Choosing the right option
Column size. Measure the column across the face the guard will wrap. It must be no wider than 580mm, ideally with some clearance so the rails are not tight to the column and an impact is not passed straight into it.
Height. At 800mm the top rail sits at the height of forks, bumpers and most van and car bodywork. Taller vehicles and high-lift trucks may need a taller guard as well.
Finish. Galvanised suits outdoor yards and anywhere appearance matters less than durability. Yellow with black bands is the usual choice for forklift aisles and car parks. Choose the RAL option to match a site colour scheme, and give us the RAL number when you order.
Fixing. Concrete in gives the most permanent installation where you can break out the floor. Bolt down suits an existing slab. Choose "with fixing bolts" if you want the nine bolts supplied.
Other shapes. Our range also includes lower column guards, two-leg corner guards and wraps with different rail layouts. Choose this one when you need a taller three-sided frame with a centre leg on the front face.
Installation, use and care
Bolt-down units fix to a suitable concrete surface through the plate on each leg, nine bolts per unit. The bolts come only with the "with fixing bolts" option. Concrete-in units are supplied with welded fixing spikes on the legs and need suitable excavated holes so the legs go 300mm below ground. Check the frame after any impact, and replace a bent guard rather than straightening it. Touch up chips in the coating to keep the steel protected.
FAQs
Will it fit my 600mm column?
No. The internal width is 580mm, so the wrapped face must be 580mm or less.
Does it protect all four sides?
No. It guards the front and both sides, with the back left open, so it can sit against a wall or racking. For a free-standing column hit from every direction, ask us about full-wrap options.
Are fixings included?
Concrete-in units have welded spikes and need concrete. For bolt down, the nine bolts come only with the "with fixing bolts" option.
Can I have it in our company colour?
Yes. Choose the RAL option and give us the RAL number in the order notes, or call us before you order.
Ordering and delivery
Each unit is British made and delivered to UK addresses, with lead time confirmed when you order. For quantity pricing, RAL colours, delivery lead times or help choosing between fixings, call 01744 520110 or email sales@industrialsuppliesco.co.uk.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.







