-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
If you need seating that a school, park or housing association can install once and largely forget about, this 1800mm steel bench with backrest is built for exactly that job. It pairs a traditional two-slat back with a three-slat seat, carried on curved steel supports and just two round pedestal legs, so the area underneath stays open for sweeping and mowing. Each bench comes fully welded, in galvanised mild steel or galvanised and powder coated in one of seven RAL colours, with a choice of cast-in legs for new paving or round flange plates for bolting to an existing concrete slab.
Why it works
Galvanised steel for low-maintenance outdoor use
The frame and slats are galvanised mild steel, the standard choice for street furniture that has to live outside all year. Unlike timber, it needs no sanding or re-staining, and on coloured versions the powder coat goes over the galvanising, so the zinc layer still protects the steel underneath.
A welded frame with fewer parts to work loose
The bench is supplied fully welded rather than as a flat-pack of bolted components. On a public site that matters: there are no slat screws to pick at and nothing to re-tighten after the first winter. Plastic end caps close off every slat end for a neat finish.
Comfortable proportions
The seat sits at 500mm with a published 5° tilt back towards the backrest, and the overall height of 833mm gives a proper back support rather than a token rail. At 1800mm long it is the length usually specified as a three-person bench. There are no armrests, which keeps the line clean and lets people sit sideways or slide along easily.
- Fully welded galvanised steel, supplied ready to install
- Two-slat backrest, three-slat seat, no armrests
- Two round legs on 1000mm centres
- Cast-in or bolt-down fixing
- Galvanised or galvanised + RAL powder coat
Where it's used
This style of bench is specified for school playgrounds, public parks, play areas, seafront promenades, town-centre squares, hospital and university grounds, station forecourts, retail parks and housing estates: anywhere seating has to survive weather and heavy use without constant attention.
Specifications
| Overall size (L x W x H) | 1800mm x 541mm x 833mm |
|---|---|
| Seat height | 500mm |
| Seat angle | 5° (from manufacturer's drawing) |
| Leg centres | 1000mm (from manufacturer's drawing) |
| Number of seats | Not published for this line |
| Seating | Two-slat backrest, three-slat seat, no armrests |
| Material | Galvanised mild steel, fully welded |
| Finish options | Galvanised; or galvanised + powder coated RAL 3020 Traffic Red, RAL 9005 Jet Black, RAL 1021 Colza Yellow, RAL 9010 Pure White, RAL 5017 Traffic Blue, RAL 6005 Moss Green, RAL 7001 Silver Grey |
| Cast-in fixing | Legs set 300mm below ground in concrete |
| Bolt-down fixing | Round flange plate 133mm x 5mm on each leg; 6 x 12mm bolts per bench (not supplied) |
| Slat ends | Plastic end caps |
| Weight | 63kg |
| Leg and slat section sizes | Not published for this line |
| Guarantee | 12 months when installed and used correctly |
Choosing the right option
Fixing. Choose Cast In when you are laying new paving, tarmac or a fresh concrete footing, or when the ground is soft landscaping. The legs extend 300mm below ground and are set in concrete, which gives the most secure, theft-resistant result and no visible plates. Choose Bolt Down for an existing concrete slab or hard surface you do not want to dig up. Each leg has a 133mm round flange plate, and you will need six 12mm anchor bolts suitable for concrete; these are not included in the price.
Finish. Plain galvanised is the most economical choice and weathers to a soft grey that suits parks and industrial sites. A RAL colour costs more but helps the bench match railings, bins or a school's colours. Jet Black and Moss Green sit quietly in heritage and green spaces, while Traffic Red, Colza Yellow and Traffic Blue stand out in playgrounds. Pure White and Silver Grey work well in modern public realm schemes.
Installation, use & care
For cast-in benches, excavate a hole for each leg, set the legs 300mm deep in concrete and support the bench level until it cures. For bolt-down benches, fix both flange plates to a sound concrete surface with 12mm bolts. Clean off any concrete splashes straight away and allow full curing time before the bench is used. Afterwards, an occasional wash with mild detergent is all the finish needs.
Frequently asked questions
How many people does it seat?
The manufacturer does not publish a seat count. At 1800mm long, it is the length usually specified as a three-person bench.
Are the fixing bolts included?
No. Bolt-down benches need six 12mm bolts per bench suitable for concrete, which you supply. Cast-in benches need no bolts, only concrete for the leg holes.
Is the coloured version painted over bare steel?
No. Coloured benches are galvanised first and then powder coated, so the zinc layer still protects the steel under the colour.
Does it come flat-packed?
No. It is supplied fully welded, so there is no assembly; you only need to fix it down. Allow for its 63kg weight and use two people to lift it.
Ordering & delivery
Choose your fixing and finish above and order online. Coloured benches are finished to order, so please check the RAL code before you buy. For multiple benches, project pricing or delivery questions, call 01744 520110 or email sales@industrialsuppliesco.co.uk and we will help.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

















