Google Top Quality Store — Verified Exceptional Shopping Experience

Stainless Steel Retractable Security Post 745mm, Telescopic Driveway Bollard with External Padlock Point, 76mm or 90mm


Price:
Sale price£468.90
Inc. Vat

Express UK Delivery (2 Working Days)

Diameter: 76mm

In stock, ready to ship

Trusted by Industry Professionals

Description

If you need to stop vehicles using a forecourt, bay or driveway for part of the day but want a clear, trip-free surface the rest of the time, this stainless steel retractable security post is the job. Raised, it stands 745mm above ground; lowered, it drops fully into its socket and the hinged lid closes over it, so there is nothing left to drive round or store. It is aimed at car showrooms, commercial yards, managed car parks and private driveways where the post has to look tidy as well as work. Choose a 76mm or 90mm post diameter, both with a stainless steel post and an in-ground socket.

Why it works

The post never leaves the ground

A lift-out post has to be carried away and put somewhere every time the bay is opened. A retractable post simply slides down into its own 1010mm socket. Nobody has to find space for it, it cannot be left lying on the ground, and it is not lost or borrowed between uses.

Stainless finish for front-of-house sites

The stainless post is the choice where appearance matters, such as a showroom forecourt or the front of an office. It has a 2mm wall, against 3mm on the galvanised versions of this design. That makes it a little lighter to lift: 5kg on the 76mm and 6kg on the 90mm, according to the manufacturer.

Locked with your own padlock

To lock it raised, you rotate the post 45 degrees and fit a padlock between the post and the lid. The lock point is above ground, which is what "external lock" means here. That lets you use a padlock you already key-manage. A padlock is not supplied.

  • 745mm high when raised, fully below ground when lowered
  • Integral hinged lid covers the socket when the post is down
  • Grab handle on top for lifting
  • 76mm or 90mm diameter, 2mm wall stainless post

Where it's used

Typical sites include car sales and showroom forecourts, where display vehicles need protecting overnight, and reserved bays in commercial car parks. Service yards and loading areas use them where access is needed only now and then. On a private driveway, a post set in the centre of the entrance stops unwanted parking without a gate. For wider openings, posts should be spaced no more than 1200mm apart so a vehicle cannot pass between them.

Specifications

Specification 76mm 90mm
Post material Stainless steel Stainless steel
Stainless grade Not published by the manufacturer
Post wall thickness 2mm 2mm
Height above ground (raised) 745mm 745mm
Socket depth below ground 1010mm 1010mm
Socket plan size Not published
Lowered position Fully below ground, covered by integral lid
Locking External padlock between post and lid after rotating post 45° (padlock not supplied, no keys included)
Lift weight (post) 5kg 6kg
Total weight 18kg 26kg
Excavation required Minimum 1200mm deep x 300mm diameter
Drainage Chippings or similar at the bottom of the hole
Recommended maximum spacing 1200mm between posts

Choosing the right option

Both diameters share the same height, socket depth and locking method, so the choice comes down to presence and weight. The 76mm post is the usual pick for driveways and single bays. It has the lighter 5kg lift and an 18kg total weight, which makes it easier to handle if it is raised and lowered every day. The 90mm post looks more substantial and is more obvious to drivers, which suits commercial forecourts and car parks. It has a 6kg lift and weighs 26kg in total. If you are mixing this post with existing bollards on site, match the diameter to them for a consistent look. If the post is mainly a visual "no parking" marker, 76mm is normally enough. Where drivers tend to test the boundary, the larger 90mm makes the barrier clearer. If you need a galvanised or coloured finish, a different height or an internal lock instead, call us before ordering.

Installation, use & care

Dig a hole at least 1200mm deep and 300mm in diameter. Put chippings or similar at the bottom so water can drain away from the socket. A socket that stands in water can freeze and silt up. The top 300–400mm of the hole must be concrete. Set the socket so the lid finishes no more than 10mm above the finished ground. Let the concrete cure fully before you use the post. Lift the post by its grab handle. Now and then, clear leaves and grit from under the lid, and wipe the stainless post with warm soapy water to keep it bright.

FAQ

Is a padlock included?

No. The post is designed to take your own padlock, fitted between the post and the lid once the post has been rotated 45 degrees. No keys are supplied with the post. Most sites choose a padlock that matches their other keyed locks.

What happens to the post when it is lowered?

It slides down fully below ground into its socket, and the integral hinged lid closes over the top. The lid should sit no more than 10mm above the finished surface, so vehicles and pedestrians can pass over it.

Do I need drainage under the socket?

Yes. The manufacturer requires drainage, such as chippings or similar, at the bottom of the excavation. Without it, water collects in the socket and can stop the post retracting fully, especially in frosty weather.

How far apart should I install several posts?

No more than 1200mm apart, so a vehicle cannot pass between raised posts. Measure your opening and divide it up before ordering, then add an extra post if any gap would be wider than 1200mm.

Ordering & delivery

Choose 76mm or 90mm above and order online, or call our sales team on 01744 520110. You can also email sales@industrialsuppliesco.co.uk for multiple-post quantities, delivery dates to site or help planning the layout. Prices shown include VAT. The post is supplied with its in-ground socket and lid, ready to set in concrete. Your padlock is not included.

Our products have been used by

Logos are for illustrative purposes only and do not imply official endorsement

About Us

Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Klarna Maestro Mastercard Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Stainless Steel Retractable Security Post 745mm, Telescopic Driveway Bollard with External Padlock Point, 76mm or 90mm

76mm

£468.90 Inc. Vat

You may also like

Recently viewed