-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
An EV charging point costs far more to repair than to protect, and the usual culprit is a slow, low bumper strike from a driver nosing into the bay. This stainless steel EV charger protector hoop stands in front of the charging column, lamp post, pay machine or sign post and takes that knock instead. It is made from grade 304 stainless steel, bent into one continuous hooped curve, and sits at car bumper height. Choose a 48mm, 76mm or 90mm tube, and cast it into concrete or bolt it down (48mm only). It suits facilities managers, EV installers and groundworkers fitting out car parks.
Why it works
Stainless steel instead of a painted or galvanised finish
Grade 304 stainless steel has no coating to chip, so a scrape from a bumper does not open the steel to rust. That makes it a sensible choice for coastal sites and public frontages, and anywhere a galvanised or painted guard would soon look tired. The brushed finish also suits modern charging units.
One continuous curve
The hoop is a single bent tube with no welded corners at the top. An impact spreads around the bend and down both legs into the ground or base plates, and there are no sharp edges for pedestrians, cables or charging leads to catch on.
Bumper-height protection
The heights run from 750mm to 1115mm above ground, which puts the tube where a car's bumper actually lands. A driver who misjudges the bay hits the hoop, not the charger housing, the screen or the cable holster.
- Grade 304 stainless steel, hooped continuous curve
- 48mm, 76mm and 90mm tube diameters
- Cast-in versions for new groundworks; bolt-down 48mm version for existing concrete
Where it's used
Typical sites are EV charging bays in supermarket, retail park and workplace car parks, hotel and leisure forecourts, and residential developments with shared chargers. The same hoop also protects lamp columns, pay-and-display machines, feeder pillars, sign posts and drainage vent pipes, or any slim street furniture close to where cars turn and park.
Specifications
| Tube diameter | Fixing | Height x width (mm) | Depth below ground | Weight |
|---|---|---|---|---|
| 48mm | Cast in | 750 x 340 | 300mm | 8kg |
| 48mm | Bolt down | 750 x 340 | - | 7kg |
| 76mm | Cast in | 1115 x 460 | 400mm | 15kg |
| 90mm | Cast in | 1000 x 520 | 300mm | 15kg |
| Material | Stainless steel grade 304 |
|---|---|
| Form | Hooped continuous curve |
| Bolt-down base | Round flange plate 120mm x 5mm on each leg (48mm version) |
| Bolts required | 6 per hoop (bolt down) - fixings not included |
| Tube wall thickness | Not published for this line |
| Guarantee | 12 months from the manufacturer, if installed and used correctly |
Choosing the right option
Tube size. The 48mm hoop (750 x 340mm) is the compact choice for wall-mounted or slim pedestal chargers, parking meters and sign posts, where you want protection without a heavy look. The 76mm hoop is the tallest at 1115mm, with a 460mm width, so use it for taller charging pedestals and lamp columns where you want the guard to be seen from the driver's seat. The 90mm hoop is the widest (520mm) and has the largest tube. Specify it for wider dual-outlet chargers and busy bays that take repeated knocks.
Fixing. Cast in is the stronger and neater installation. The legs go straight into concrete with nothing on show at ground level, which suits new bays and resurfacing work. Bolt down is offered on the 48mm size only. Use it where there is already a sound concrete slab and you cannot break out the surface. Each leg has a round 120mm plate, and you will need six suitable anchor bolts per hoop.
Installation, use & care
For cast in, excavate two holes to take the legs to the stated depth (300mm for 48mm and 90mm, 400mm for 76mm). Set the hoop plumb and square to the column, then backfill with concrete and brace it until the concrete has cured. For bolt down, fix to a suitable concrete surface using six anchors chosen for the slab. Leave enough room between the hoop and the charger for the cable and the connector door. Wipe it down occasionally with clean water to remove road grime.
Frequently asked questions
Are the bolts included with the bolt-down version?
No. The bolt-down hoop is supplied without fixings. You need six anchor bolts per hoop, three through each base plate, chosen to suit your concrete. We can advise on suitable anchors when you order.
Why stainless rather than galvanised?
Stainless steel has no coating that can be scratched through, so it keeps its finish after knocks and handles salt air better. It costs more than galvanised but holds its appearance on prominent or coastal sites.
Can the 76mm or 90mm hoops be bolted down?
No. In this range only the 48mm hoop is offered in a bolt-down version. The 76mm and 90mm hoops are cast into concrete.
Will one hoop protect a charger on its own?
A single hoop in front of the column covers the most common hit, which is a car driving forward into the bay. For chargers that can be hit from more than one side, many installers fit a hoop on each exposed face.
Ordering & delivery
Choose your tube diameter and fixing above and add the hoop to your basket. Prices include VAT and UK delivery is available. For multi-bay projects or help picking a size, call our team on 01744 520110 or email sales@industrialsuppliesco.co.uk.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.



