-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
If your smoking shelter has a roof, a back panel and an ashtray but nowhere to rest, people end up leaning on the glazing, the frame posts or the bin. This galvanised steel perch bench gives them a proper place to lean. It is a single box-section top beam at 700mm high on two 48mm diameter legs, bolted down to the shelter's concrete base through a round foot plate on each leg. It comes in 1000mm and 1500mm lengths to suit compact and wider shelters. It suits facilities managers and shelter installers who want a tidy, hard-wearing seat with a small footprint.
Why a perch bench works in a smoking shelter
Leaning height, small footprint
A perch bench is not a full-height seat. Users rest against the 700mm high top beam with their weight still partly on their feet, which is how most people use a shelter during a short break. At only 90mm wide, the bench sits close to the back or side panel and leaves the rest of the floor clear. In a 2m or 3m shelter, a standard bench would block the entrance.
Hot-dip galvanised mild steel
The frame is fully welded mild steel, hot-dip galvanised as standard. The zinc coating protects the steel inside and out against rain and condensation, with no painting needed. The beam ends are finished with plastic end caps, so there are no open tube ends to catch clothing or collect water.
Bolt-down fixing
Each leg has a 133mm x 5mm round flange plate with three holes for 12mm anchor bolts, which means six bolts per bench. Once fixed to sound concrete, it cannot be dragged around or taken.
- 700mm high leaning beam, 90mm wide
- Two 48mm diameter legs on 133mm round foot plates
- Fully welded, hot-dip galvanised mild steel
- Plastic end caps fitted
- 1000mm (9kg) or 1500mm (12kg) long
Where it's used
The main use is inside workplace smoking shelters at factories, warehouses, distribution centres, hospitals, offices and retail parks. The same bench also works in waiting and bus shelters, under walkway canopies, at commuter stops and along busy pedestrian routes.
Specifications
| Product | Perch bench for smoking, waiting and bus shelters |
|---|---|
| Length | 1000mm or 1500mm |
| Width | 90mm |
| Height | 700mm |
| Legs | 2 x 48mm diameter |
| Foot plates | Round flange plate, 133mm diameter x 5mm, one per leg |
| Fixing | Bolt down to concrete, 6 x 12mm anchor bolts per bench (3 per leg); bolts not included |
| Material | Mild steel, fully welded |
| Finish | Hot-dip galvanised |
| End caps | Plastic end caps fitted to the top beam |
| Weight | 1000mm: 9kg; 1500mm: 12kg |
| Beam section size / leg centres | Not published for this line |
| Manufacturer guarantee | 12 months when installed and used correctly |
Choosing the right option
The only choice is length. Measure the inside of the shelter along the wall where the bench will go, between the frame posts. Then allow room at each end so people can step in and out, and so the bench stays clear of any ashtray or bin.
- 1000mm: suits compact shelters around 2m wide, or a side wall of a larger shelter. Room for two people to lean; 9kg.
- 1500mm: suits 3m and wider shelters along the back panel, where three people may use it at once. 12kg.
In long shelters, two benches with a gap between them often work better than one long run, because people can get past to the ashtray. Both lengths share the same height and fixing.
Installation, use and care
The bench arrives fully welded, so there is nothing to assemble. Stand it in position, mark the six holes through the foot plates, drill and fix to the concrete with 12mm anchor bolts suited to your slab (not supplied). It must go on sound hardstanding such as an existing concrete shelter base, not on paving slabs laid on sand. Check that the bolts are tight after the first few weeks. Galvanised steel needs no painting. Wash it down occasionally and touch up any deep scratches with zinc-rich paint.
Frequently asked questions
Does it fix to the shelter frame or the wall?
No. It is a freestanding bolt-down design. It fixes to the concrete floor of the shelter through the round foot plate on each leg, using three 12mm bolts per leg. Nothing attaches to the glazing or frame, so it suits most shelter makes.
Are the fixing bolts included?
No. The bench is supplied without fixings. You will need six 12mm anchor bolts suited to your concrete. Ask us if you would like suitable anchors quoted with your order.
Is it comfortable to sit on?
It is designed for leaning and short rests rather than long sitting. At 700mm high, most adults rest against it with their feet on the ground. For longer waits, a standard-height bench is the better choice.
Can I get it in a colour?
This listing is the galvanised finish. If you need a powder-coated colour to match your shelter, call us for a quote before ordering.
Ordering and delivery
Choose 1000mm or 1500mm and order online. Prices include VAT. For trade accounts, larger quantities, matching shelters or fixings, call 01744 520110 or email sales@industrialsuppliesco.co.uk.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.



